Logo Bundesministerium für wirtschaftliche Zusammenarbeit und Entwicklung
Sehr Gute Wahl

Glaub­würdigkeit

Umwelt­freundlichkeit

Sozial­verträglichkeit

  • Schwerpunkt
  • Siegelgeber
  • Gut zu wissen
Der Standard spiegelt seit 2000 die IVN entworfenen Richtlinien für Naturtextilien wider und bildet die gesamte textile Produktionskette ab, in ökologischer und sozialverantwortlicher Hinsicht. Schwerpunkt ist der Einsatz von 100% natürlichen Bio-Fasern.
Siegelinhaber ist der Internationale Verband der Naturtextilwirtschaft e. V. (IVN). In dem Verband sind Akteur:innen der Naturtextilwirtschaft, von Faserhersteller:innen bis zu Händler:innen, vertreten. Der IVN ist Mitinhaber der Global Organic Textile Standard (GOTS) gGmbH, die ebenfalls ein Siegel vergibt.
Nur Produkte, deren gesamte Herstellung in jedem einzelnen beteiligten Betrieb zertifiziert wurde, dürfen das Siegel tragen. Unsere Bewertung basiert auf der Version 6.1 von Naturtextil IVN zertifiziert BEST und wird derzeit überarbeitet.
Informationen zu den Standarddokumenten

Nachfolgend finden Sie eine Liste mit Dokumenten und Richtlinien, die bei der Erhebung der Standarddaten berücksichtigt wurden:

NATURTEXIL IVN certified BEST (IVN BEST) Version 6.1 IVN Statues (Edition May 2005) IVN FUNDING: ADMISSION FEE, DUES, APPORTIONMENTS (valid since July 2014) IVN Daten & Fakten documents mentioned in 1.5 reference documents Manual for the Implementation of the IVN BEST Standard: Licensing and Labelling Guide: Policy and Template for issuing Certificates of Compliance (Scope Certificates, SCs): Policy and Template for issuing Transaction Certificates (TCs): Relevant GOTS documents Complaint procedure for issues related to the implementation of the GOTS quality assurance and labelling system Approval Procedure and Requirements for Certification Bodies Version 2.0 Issue of 25 May 2017 POLICY FOR ISSUANCE OF SCOPE CERTIFICATES VERSION 3.0 Issued 6 October 2021 POLICY FOR ISSUANCE OF TRANSACTION CERTIFICATES VERSION 3.0 6 October 2021 Relevant IOAS documents General Operating Manual for Provision of Accreditation and Assessment Services Updated Dec 18, 2020

Glaub­würdigkeit 73%

  • Verfügbarkeit der Organisationsstruktur
  • Unabhängigkeit des Systeminhabers vom Zertifikatsinhaber
  • Verfügbarkeit des Standards
  • Öffentliche Konsultation des Standards
  • Regelmäßige Revision des Standards
  • Rechtlicher Status
  • Finanzierungsquellen
  • Prozess der Standardsetzung
  • Bewertungsmethodik
  • Nachhaltigkeitsziele und Zielsetzung des Programms
  • Zentrale Themen
  • Feedback von Interessengruppen
  • Konsistente Auslegung des Standards
  • Zugänglichkeit des Systems
  • Beschwerde- und Einspruchsverfahren der Prüfstellen
  • Verfügbarkeit von Prüfberichten
  • Geltungsbereich und Gültigkeitsdauer des Zertifikats / der Lizenz
  • Zertifiziertes oder geprüftes Unternehmen / gelabelte Produktliste
  • Akkreditierte/ zugelassene Prüfstellen
  • Unabhängigkeit der Konformitätsbewertung
  • Konsistente Entscheidungsfindung bei Konformitätsbewertung
  • Verfahren bei Nicht-Konformität
  • Claims- und Kennzeichnungsrichtlinien
  • Systemmanagement
    8/16
    • Governance
      8/12
      • Stellt die standardsetzende Organisation ihre Organisationsstruktur, einschließlich der Zusammensetzung der Leitungsorgane, öffentlich zur Verfügung?
        Antwort: Ja, öffentlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Ja (auf Anfrage) (0 Punkte)
        • Ja, öffentlich (1 Punkt)
        • Nein (0 Punkte)
      • Handelt es sich bei der standardsetzenden Organisation um eine juristische Person, eine Organisation, die eine Partnerschaft von juristischen Personen ist, oder um eine staatliche oder zwischenstaatliche Einrichtung?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
      • Gibt es einen Mechanismus für die Beteiligung von Interessengruppen an der Entwicklung des Standardsystems und der Entscheidungsfindung?
        Antwort: Yes available publicly
        Punktzahl: 2/2
        Mögliche Antworten
        • Yes available publicly (2 Punkte)
        • Yes available on request (1 Punkt)
        • No (0 Punkte)
      • Stellen die Abstimmungsverfahren des obersten Entscheidungsgremiums eine ausgewogene Vertretung der Interessen der Beteiligten sicher, bei der kein Einzelinteresse überwiegt?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
      • Stellt die standardsetzende Organisation quantitative Informationen über die Einkommensquellen oder die Finanzierungsstruktur des Systems zur Verfügung?
        Antwort: Ja (auf Anfrage)
        Punktzahl: 1/2
        Mögliche Antworten
        • Ja (auf Anfrage) (1 Punkt)
        • Ja, öffentlich (2 Punkte)
        • Nein (0 Punkte)
      • Verfügt der Systeminhaber über ein internes Qualitätsmanagementsystem?
        Antwort: Nein
        Punktzahl: 0/1
        Mögliche Antworten
        • Ja (auf Anfrage) (1 Punkt)
        • Ja, öffentlich (1 Punkt)
        • Nein (0 Punkte)
      • Ist die standardsetzende Organisation wirtschaftlich unabhängig vom Zertifikatsinhaber?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
      • Hat die standardsetzen-de Organisation nachhaltigkeitsorientierte Ziele und Vorgaben?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
      • Verfügt die standardsetzende Organisation über eine Strategie zur Erreichung ihrer nachhaltigkeitsorientierten Ziele?
        Antwort: Nein
        Punktzahl: 0/2
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (auf Anfrage) (1 Punkt)
        • Ja, öffentlich (2 Punkte)
    • Wirkung
      0/3
      • Verfügt die standardsetzende Organisation über ein System zur Messung der Wirkung und Fortschritte bei der Erreichung ihrer Nachhaltigkeitsziele?
        Antwort: Nein
        Punktzahl: 0/2
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (auf Anfrage) (1 Punkt)
        • Ja, öffentlich (2 Punkte)
      • Nutzt die standardsetzende Organisation die Ergebnisse des Monitorings, um daraus zu lernen und ihr Programm zu verbessern?
        Antwort: Nein
        Punktzahl: 0/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
      • Stellt der Systeminhaber die Nachhaltigkeitsergebnisse aus M&E zur Verfügung?
        Antwort: Not applicable
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (auf Anfrage) (1 Punkt)
        • Ja, öffentlich (2 Punkte)
        • Not applicable (0 Punkte)
    • Beschwerdemechanismus
      0/0
      • Verfügt die standardsetzende Organisation über einen öffentlich und leicht zugänglichen Beschwerdemechanismus?
        Antwort: Keine Informationen vorhanden
        Punktzahl: None/1
        Mögliche Antworten
        • No (0 Punkte)
        • Yes (1 Punkt)
    • Unterstützende Strategien
      0/1
      • Werden im Rahmen des Programms Strategien oder Aktivitäten angeboten, um die Leistung der teilnehmenden Unternehmen zu verbessern, z. B. durch den Aufbau von Kapazitäten oder den Zugang zu Finanzmitteln?
        Antwort: Nein
        Punktzahl: 0/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
        • Nicht anwendbar (0 Punkte)
  • Standardsetzung
    10/13
    • Wird der Standard öffentlich und kostenlos zur Verfügung gestellt?
      Antwort: Ja, öffentlich
      Punktzahl: 1/1
      Mögliche Antworten
      • Ja (auf Anfrage) (0 Punkte)
      • Ja, öffentlich (1 Punkt)
      • Nein (0 Punkte)
    • Wurden im Rahmen des Standardsetzungsprozesses wichtige Nachhaltigkeitsaspekte in dem Sektor, in dem das System tätig ist, oder im Produktlebenszyklus definiert?
      Antwort: Ja
      Punktzahl: 1/1
      Mögliche Antworten
      • Nein (0 Punkte)
      • Ja (1 Punkt)
    • Wird der Standardsetzungsprozess oder eine Zusammenfassung des Verfahrens, wie sich Interessengruppen an dem Standardsetzungsprozess beteiligen können, öffentlich zugänglich gemacht?
      Antwort: Ja, öffentlich
      Punktzahl: 1/1
      Mögliche Antworten
      • Ja (auf Anfrage) (0 Punkte)
      • Ja, öffentlich (1 Punkt)
      • Nein (0 Punkte)
    • Können sich Interessenvertreter*innen am Standardsetzungsprozess beteiligen?
      Antwort: Members only
      Punktzahl: 1/2
      Mögliche Antworten
      • Members only (1 Punkt)
      • Invitation only (1 Punkt)
      • All stakeholders (2 Punkte)
    • Haben die von dem Standard direkt betroffenen Interessengruppen die Möglichkeit, sich an dem Standardsetzungsprozess zu beteiligen?
      Antwort: Ja
      Punktzahl: 1/1
      Mögliche Antworten
      • Nein (0 Punkte)
      • Ja (1 Punkt)
    • Werden Standardentwürfe im Rahmen des Entwicklungs- und Überarbeitungsprozesses auf ihre Relevanz und Überprüfbarkeit hin getestet/erprobt?
      Antwort: Nein
      Punktzahl: 0/1
      Mögliche Antworten
      • Ja (1 Punkt)
      • Nein (0 Punkte)
      • Not applicable (0 Punkte)
    • Legt die standardsetzende Organisation Informationen darüber vor, wie die Anregungen aus den Konsultationen in die endgültige Fassung des Standards eingeflossen sind?
      Antwort: Ja, öffentlich
      Punktzahl: 2/2
      Mögliche Antworten
      • Ja (auf Anfrage) (1 Punkt)
      • Ja, öffentlich (2 Punkte)
      • Nein (0 Punkte)
    • Stellen die Abstimmungsverfahren des für den Standardsetzungsprozess zuständigen Entscheidungsgremiums eine ausgewogene Vertretung der Interessen der Beteiligten sicher?
      Antwort: Ja
      Punktzahl: 1/1
      Mögliche Antworten
      • Nein (0 Punkte)
      • Ja (1 Punkt)
    • Wird der Standard mindestens alle 5 Jahre überprüft und ggf. überarbeitet?
      Antwort: Ja
      Punktzahl: 1/1
      Mögliche Antworten
      • Nein (0 Punkte)
      • Ja (1 Punkt)
    • Stellt das System sicher, dass Leitlinien vorhanden sind, die eine einheitliche Auslegung des Standards unterstützen?
      Antwort: Ja
      Punktzahl: 1/1
      Mögliche Antworten
      • Nein (0 Punkte)
      • Ja (1 Punkt)
    • Gibt es Verfahren und Leitlinien für die Anwendung oder Auslegung des Standards in regionalen Kontexten?
      Antwort: Nein
      Punktzahl: 0/1
      Mögliche Antworten
      • Ja (1 Punkt)
      • Nein (0 Punkte)
      • Not applicable (0 Punkte)
  • Konformitätskontrolle
    43/57
    • Konformitätskontrollsystem
      16/19
      • Gibt es eine öffentlich zugängliche, dokumentierte Bewertungsmethodik, mit der die Konformität mit dem Standard bewertet werden kann?
        Antwort: Ja, öffentlich verfügbar
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja, verfügbar auf Anfrage (0 Punkte)
        • Ja, öffentlich verfügbar (1 Punkt)
      • Können sich alle potenziellen Antragsteller innerhalb des Geltungsbereichs des Programms bewerben (um zertifiziert/geprüft zu werden)?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
      • Stellt die standardsetzende Organisation Informationen über die Bewertungsgebühren zur Verfügung oder verlangt sie dies von den Prüfstellen?
        Antwort: Ja, öffentlich verfügbar
        Punktzahl: 2/2
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja, verfügbar auf Anfrage (1 Punkt)
        • Ja, öffentlich verfügbar (2 Punkte)
      • Verlangt die standardsetzende Organisation von den Prüfstellen, dass sie über ein leicht zugängliches Beschwerde- und Einspruchsverfahren verfügen?
        Antwort: Yes publicly available
        Punktzahl: 2/2
        Mögliche Antworten
        • No (0 Punkte)
        • Yes available on request (1 Punkt)
        • Yes publicly available (2 Punkte)
      • Stellt die standardsetzende Organisation eine Zusammenfassung der Zertifizierungs-/Verifizierungsberichte (ohne personenbezogene und wirtschaftlich sensible Informationen) zur Verfügung oder verlangt dies von den Prüfstellen?
        Antwort: Ja (auf Anfrage)
        Punktzahl: 2/2
        Mögliche Antworten
        • Nein (keine Berichte) (0 Punkte)
        • Nein (vertraulich) (1 Punkt)
        • Ja (auf Anfrage) (2 Punkte)
        • Ja, öffentlich (2 Punkte)
      • Legt das Zertifikat oder die Lizenz den Umfang der Konformitätsbewertung und die Gültigkeitsdauer fest?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
      • Führt die standardsetzende Organisation eine öffentlich zugängliche Liste der zertifizierten oder geprüften Unternehmen oder eine Liste der geprüften Produkte/Produktgruppen oder eine Liste der Mitglieder (im Falle von mitgliedschaftsbasierten Initiativen) oder verlangt dies von Prüfstellen?
        Antwort: Yes incl. scope of certificate or license
        Punktzahl: 2/2
        Mögliche Antworten
        • Yes (1 Punkt)
        • No (0 Punkte)
        • Yes incl. scope of certificate or license (2 Punkte)
      • Führt die standardsetzende Organisation eine aktuelle und öffentlich zugängliche Liste aller akkreditierten/zugelassenen/suspendierten Konformitätsbewertungsstellen?
        Antwort: Ja, öffentlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (auf Anfrage) (0 Punkte)
        • Ja, öffentlich (1 Punkt)
      • Überprüft die standard-setzende Organisation regelmäßig die Wirksamkeit des Konformitätskontrollsystems?
        Antwort: Ad hoc
        Punktzahl: 0/1
        Mögliche Antworten
        • Annual (1 Punkt)
        • Every 3 years (1 Punkt)
        • Every 5 years (1 Punkt)
        • Ad hoc (0 Punkte)
      • Verlangt die standardsetzende Organisation, dass Kunden und andere betroffene Interessengruppen über Änderungen am Konformitätskontrollsystem informiert werden?
        Antwort: Nein
        Punktzahl: 0/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
      • Verlangt die standardsetzende Organisation kontinuierliche Leistungsverbesserungen, um die Zertifizierung aufrechtzuerhalten?
        Antwort: Nein
        Punktzahl: 0/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
      • Verfügt die standardsetzende Organisation über eine dokumentierte Bewertungsmethode für Prüfstellen, die die CoC bewerten?
        Antwort: yes publicly available
        Punktzahl: 2/2
        Mögliche Antworten
        • yes publicly available (2 Punkte)
        • yes available on request (1 Punkt)
        • No (0 Punkte)
        • Not applicable (0 Punkte)
      • Verlangt die standardsetzende Organisation von den Prüfstellen, dass sie über die eingegangenen Beschwerden und die zur Lösung des Problems getroffenen Maßnahmen Bericht erstatten?
        Antwort: Yes
        Punktzahl: 1/1
        Mögliche Antworten
        • No (0 Punkte)
        • Yes (1 Punkt)
      • Unterhält die standardsetzende Organisation ein Informationsmanagementsystem?
        Antwort: Keine Informationen vorhanden
        Punktzahl: None/1
        Mögliche Antworten
        • No (0 Punkte)
        • Yes (1 Punkt)
      • Hat die standardsetzende Organisation Gleichwertigkeitsanforderungen an die Ergebnisse anderer, von ihr anerkannten, Konformitätskontrollen festgelegt?
        Antwort: Yes
        Punktzahl: 1/1
        Mögliche Antworten
        • Yes (1 Punkt)
        • No (0 Punkte)
        • Not applicable (0 Punkte)
    • Konformitätsbewertung
      15/17
      • Konformitätsbewertungsverfahren
        4/4
        • Verlangt die standardsetzende Organisation eine Konformitätsprüfung aller Kunden durch unabhängige Dritte, um die Einhaltung des Standards zu überprüfen?
          Antwort: Ja
          Punktzahl: 2/2
          Mögliche Antworten
          • Nein (0 Punkte)
          • Ja (2 Punkte)
          • Nicht anwendbar (0 Punkte)
        • Legt die standardsetzende Organisation Leitlinien für die Entscheidungsfindung fest, um sicherzustellen, dass die Prüfstellen einheitliche Verfahren zur Konformitätsbewertung von Kun-den oder Laborergebnissen mit dem Standard anwenden?
          Antwort: Ja
          Punktzahl: 1/1
          Mögliche Antworten
          • Ja (1 Punkt)
          • Nein (0 Punkte)
        • Verlangt die standardsetzende Organisation, dass die Prüfstellen über ein Verfahren verfügen, das regelt, wie die Kunden mit Nichtkonformitäten umzugehen haben, auch wenn ein Zertifikat oder eine Lizenz ausgesetzt oder widerrufen wird?
          Antwort: Ja
          Punktzahl: 1/1
          Mögliche Antworten
          • Nein (0 Punkte)
          • Ja (1 Punkt)
      • Nachhaltigkeitsprüfungen
        7/9
        • Verfügt die standardsetzende Organisation über ein dokumentiertes Aufsichtskonzept, das von den Prüfstellen verlangt, dass sie akkreditiert sind oder die Anforderungen der ISO/IEC 17065, ISO/IEC 17021, ISO/IEC 17020, ISO/IEC 17025 (für Laboratorien) erfüllen oder alternativ relevante Anforderungen des ISEAL Assurance Code erfüllen?
          Antwort: Ja
          Punktzahl: 1/1
          Mögliche Antworten
          • Nein (0 Punkte)
          • Ja (1 Punkt)
          • Nicht anwendbar (0 Punkte)
        • Verlangt die standardsetzende Organisation, dass die Kunden regelmäßig und regelmäßig geprüft werden?
          Antwort: 1 Jahr oder weniger
          Punktzahl: 1/1
          Mögliche Antworten
          • 1 Jahr oder weniger (1 Punkt)
          • 1-2 Jahre (1 Punkt)
          • 2-3 Jahre (1 Punkt)
          • 4-5 Jahre (1 Punkt)
          • 5 Jahre oder mehr (1 Punkt)
          • Not applicable (0 Punkte)
        • Beruht die Häufigkeit oder Intensität eines Audits oder einer Aufsichtsprüfung auf einer Risikobewertung des Kunden oder der Konformitätsbewertungsstelle?
          Antwort: Ja
          Punktzahl: 1/1
          Mögliche Antworten
          • Ja (1 Punkt)
          • Nein (0 Punkte)
          • Not applicable (0 Punkte)
        • Legt die standardsetzende Organisation die erforderliche Intensität für jede Art von Audit und die Tätigkeiten fest, die von den Prüfstellen für jeden Standard durchgeführt werden müssen?
          Antwort: Ja
          Punktzahl: 1/1
          Mögliche Antworten
          • Nein (0 Punkte)
          • Ja (1 Punkt)
          • Nicht anwendbar (0 Punkte)
        • Erlaubt oder verlangt die standardsetzende Organisation, dass die Konformitätsbewertungsstellen unangekündigte Audits durchführen?
          Antwort: Erlaubt
          Punktzahl: 1/2
          Mögliche Antworten
          • Erlaubt (1 Punkt)
          • Vorgeschrieben (2 Punkte)
          • Nicht erlaubt (0 Punkte)
          • Not applicable (0 Punkte)
        • Sind die Prüfer*innen verpflichtet, während des Audits- und Aufsichtsprüfprozesses den Beitrag externer Interessengruppen einzuholen?
          Antwort: Nein
          Punktzahl: 0/1
          Mögliche Antworten
          • Nein (0 Punkte)
          • Ja (1 Punkt)
          • Nicht anwendbar (0 Punkte)
        • Verlangt die standardsetzende Organisation von den Konformitätsbewertungsstellen, dass sie ein einheitliches Berichtsformat verwenden?
          Antwort: Ja
          Punktzahl: 1/1
          Mögliche Antworten
          • Ja (1 Punkt)
          • Nein (0 Punkte)
          • Not applicable (0 Punkte)
        • Verlangt die standardsetzende Organisation, dass Prüfstellen und Aufsichtsstellen kompetentes und unparteiisches Personal (neben Prüfer*innen / Auditor*innen /Teams) einsetzen, um Entscheidungen über die Einhaltung der Vorschriften zu treffen?
          Antwort: Ja
          Punktzahl: 1/1
          Mögliche Antworten
          • Ja (1 Punkt)
          • Nein (0 Punkte)
          • Not applicable (0 Punkte)
      • Gruppenzertifizierung
        0/0
        • Muss die Gruppe über ein gemeinsames Verwaltungssystem mit klaren Zuständigkeiten für die Umsetzung des Systems verfügen?
          Antwort: Not applicable
          Mögliche Antworten
          • Ja (1 Punkt)
          • Nein (0 Punkte)
          • Not applicable (0 Punkte)
        • Verfügt die standardsetzende Organisation über einen Mechanismus, der vorschreibt und begründet, wie alle Standorte innerhalb einer Gruppenzertifizierung im Laufe der Zeit auditiert werden?
          Antwort: Not applicable
          Mögliche Antworten
          • Nein (0 Punkte)
          • Ja (1 Punkt)
          • Not applicable (0 Punkte)
        • Gibt es eine Formel für den Stichprobenumfang und ein Stichprobenverfahren, um die Anzahl der Gruppenmitglieder zu bestimmen, die extern überprüft wird, und wie die Stichprobe ausgewählt wird?
          Antwort: Not applicable
          Mögliche Antworten
          • Nein (0 Punkte)
          • Ja (1 Punkt)
          • ja, auf Grundlage einer Risikobewertung (2 Punkte)
          • Not applicable (0 Punkte)
        • Sind in den Anforderungen an die Gruppenzerti-fizierung/-prüfung die Bedingungen festgelegt, unter denen ein Gruppenmitglied suspendiert oder aus einer Gruppe ausgeschlossen werden kann?
          Antwort: Not applicable
          Mögliche Antworten
          • Member suspended from certification (1 Punkt)
          • Member removed from a group (1 Punkt)
          • Group suspension (1 Punkt)
          • No repercussion (0 Punkte)
          • Not applicable (0 Punkte)
      • Produktionskette (Chain of Custody)
        1/1
        • Verlangt die standardsetzende Organisation, dass alle Unternehmen, die das zertifizierte Produkt physisch handhaben, sich einem CoC-Audit unterziehen, wenn das Produkt für den Einzelhandelsverkauf als zertifiziertes, gekennzeichnetes Produkt bestimmt sein kann?
          Antwort: Ja
          Punktzahl: 1/1
          Mögliche Antworten
          • Ja (1 Punkt)
          • Nein (0 Punkte)
          • Not applicable (0 Punkte)
      • Laboruntersuchungen
        3/3
        • Wird in der dokumentierten Bewertungsmethodik auf Testmethoden verwiesen oder sind diese enthalten?
          Antwort: Ja (auf Anfrage)
          Punktzahl: 1/1
          Mögliche Antworten
          • Nein (0 Punkte)
          • Ja (auf Anfrage) (1 Punkt)
          • Ja, öffentlich (1 Punkt)
          • Not applicable (0 Punkte)
        • Gibt es Vorgaben für Stichproben bei der Konformitätsüberwachung?
          Antwort: Yes
          Punktzahl: 1/1
          Mögliche Antworten
          • No (0 Punkte)
          • Yes (1 Punkt)
          • Not applicable (0 Punkte)
        • Gibt es ein Verfahren für den Umgang mit nicht-konformen Produkten, die von einem Kunden/Lizenznehmer hergestellt wurden?
          Antwort: Ja
          Punktzahl: 1/1
          Mögliche Antworten
          • Ja (1 Punkt)
          • Nein (0 Punkte)
          • Not applicable (0 Punkte)
    • Kompetenzen der Prüfer*innen
      4/8
      • Legt die standardsetzende Organisation die Qualifikationen, Kompetenzen, die erforderliche Mindesterfahrung in der Branche und die Schulungsanforderungen für die Prüfer*innen für Konformitäts- / Aufsichtskontrollen fest?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
        • Nicht anwendbar (0 Punkte)
      • Legt die standardsetzende Organisation die Qualifikationen, Kompetenzen, die erforderliche Mindesterfahrung in der Branche und die Schulungsanforderungen für die Prüfer*innen für Konformitäts- / Aufsichtskontrollen fest?
        Antwort: No
        Punktzahl: 0/1
        Mögliche Antworten
        • No (0 Punkte)
        • Yes (1 Punkt)
      • Verlangt die standardsetzende Organisation, dass die Auditor*innen der Konformitätsbewertungsstellen eine Auditorenschulung zu einem für das System relevanten Standard, die auf der ISO 19011 oder einer gleichwertigen Norm basiert, erfolgreich absolvieren?
        Antwort: Nein
        Punktzahl: 0/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
        • Not applicable (0 Punkte)
      • Verlangt die standardsetzende Organisation, dass die Anbieter von Prüfungs- und Aufsichtsleistungen ein Programm zur Überwachung und Sicherstellung der kontinuierlichen Kompetenz und guten Leistung der Prüfer*innen und Auditor*innen durchführen?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
        • Not applicable (0 Punkte)
      • Führt die standardsetzende Organisation Kalibrierungsmaßnahmen durch oder verlangt sie von den Konformitätsbewertungsstellen, dass sie sicherstellen, dass die der Prüfer*innen / Auditor*innen aufeinander abgestimmt sind?
        Antwort: Ad Hoc
        Punktzahl: 1/2
        Mögliche Antworten
        • Annually (2 Punkte)
        • Ad Hoc (1 Punkt)
        • No (0 Punkte)
        • Not applicable (0 Punkte)
      • Verlangt die standardsetzende Organisation, dass die Konformitätsbewertungsstellen über einen Verhaltenskodex oder ein gleichwertiges Instrument sowie über unterstützende Verfahren verfügt, um das Verhalten und die Handlungen der Mitarbeitenden der Konformitätsbewertungsstelle zu lenken und gegen Fehlverhalten vorzugehen?
        Antwort: Nein
        Punktzahl: 0/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
        • Not applicable (0 Punkte)
      • Bewertet die standardsetzende Organisation potenzielle Risiken für die Unparteilichkeit der Prüfer*innen und verlangt sie, wo dies gerechtfertigt ist, von den Konformitätsbewertungsstellen und Aufsichtsgremien, Praktiken zur Minderung dieser Risiken anzuwenden?
        Antwort: Yes
        Punktzahl: 1/1
        Mögliche Antworten
        • No (0 Punkte)
        • Yes (1 Punkt)
    • Aufsicht
      8/13
      • Erfordert das System einen Aufsichtsmechanismus und ist dieser dokumentiert?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
        • Nicht anwendbar (0 Punkte)
      • Wird die Aufsicht von einer dritten Partei durchgeführt, die von der standardsetzenden Organisation und den Konformitätsbewertungsstellen unabhängig ist?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Ja (1 Punkt)
        • Nein (0 Punkte)
        • Not applicable (0 Punkte)
      • Legt die standardsetzende Organisation die Art und Intensität der Aufsichtstätigkeiten über die Konformitätsbewertungsstellen fest?
        Antwort: 4-5 years
        Punktzahl: 1/2
        Mögliche Antworten
        • <1 year (2 Punkte)
        • 1 year (2 Punkte)
        • 2-3 years (2 Punkte)
        • 4-5 years (1 Punkt)
        • >5 years (1 Punkt)
        • Not applicable (0 Punkte)
        • None (0 Punkte)
      • Berücksichtigt die Intensität der Aufsichtstätigkeiten die Risikofaktoren, die mit der Konformitätsbewertungsstelle und ihrem Personal verbunden sind?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
        • Not applicable (0 Punkte)
      • Legt die standardsetzende Organisation das Bewerbungs- und Auswahlverfahren für Konformitätsbewertungsstellen klar fest?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Ja (1 Punkt)
        • Nein (0 Punkte)
        • Not applicable (0 Punkte)
      • Bewertet die standardsetzende Organisation die systemspezifische Kompetenz bei der Zulassung von Konformitätsbewertungsstellen, die nach anderen einschlägigen Standards akkreditiert sind (Proxy-Akkreditierung)?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
        • Ja, Bewertung der programmspezifischen Kompetenz (1 Punkt)
        • Not applicable (0 Punkte)
      • Verfügt die standardsetzende Organisation über dokumentierte und zugängliche Beschwerde- und Einspruchsmechanismen oder verlangt es von den Aufsichtsstellen solche?
        Antwort: Nein
        Punktzahl: 0/1
        Mögliche Antworten
        • Ja (1 Punkt)
        • Nein (0 Punkte)
        • Not applicable (0 Punkte)
      • Legt die standardsetzende Organisation fest oder verlangt sie von der Aufsichtsstelle, dass sie festlegt, wie die Konformitätsbewertungsstellen mit den durch die Aufsicht festgestellten Nichtkonformitäten umgehen müssen?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Ja (1 Punkt)
        • Nein (0 Punkte)
        • Not applicable (0 Punkte)
      • Verlangt die standardsetzende Organisation, dass Zusammenfassungen von Aufsichtsberichten (ohne persönliche und wirtschaftlich sensible Informationen) öffentlich zugänglich gemacht werden?
        Antwort: Nein
        Punktzahl: 0/2
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (auf Anfrage) (1 Punkt)
        • Ja, öffentlich (2 Punkte)
        • Not applicable (0 Punkte)
      • Verlangt die standardsetzende Organisation, dass die Vor-Ort-Prüfung der Konformitätsbewertungsstelle in den Aufsichtszyklus einbezogen werden?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
        • Not applicable (0 Punkte)
      • Verlangt die standardsetzende Organisation, dass die Aufsichtsstelle auch Überprüfungen der Leistung der Konformitätsbewertungsstelle vor Ort umfasst?
        Antwort: Nein
        Punktzahl: 0/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
        • Not applicable (0 Punkte)
  • Claims und Rückverfolgbarkeit
    9/10
    • Rückverfolgbarkeit
      5/5
      • Verfügt die standardsetzende Organisation über einen dokumentierten Chain-of-Custody-Standard oder andere Rückverfolgbarkeitsanforderungen, die für die gesamte Lieferkette gelten?
        Antwort: Ja, öffentlich
        Punktzahl: 2/2
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja, auf Anfrage (1 Punkt)
        • Ja, öffentlich (2 Punkte)
        • Not applicable (0 Punkte)
      • Gibt es CoC-Anforderungen für nicht zertifiziertes Material, falls die Vermischung von zertifizierten mit nicht zertifizierten Inputs erlaubt ist?
        Antwort: Not applicable
        Mögliche Antworten
        • Ja (1 Punkt)
        • Nein (0 Punkte)
        • Not applicable (0 Punkte)
      • Verlangt die standardsetzende Organisation von den Konformitätsbewertungsstellen, dass sie überprüfen, ob alle Unternehmen innerhalb der Produktkette genaue und zugängliche Aufzeichnungen führen, anhand derer jedes zertifizierte Produkt oder jede Charge von Produkten von der Verkaufsstelle bis zum Käufer zurückverfolgt werden kann?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Ja (1 Punkt)
        • Nein (0 Punkte)
        • Not applicable (0 Punkte)
      • Sind Unternehmen verpflichtet, CoC-Aufzeichnungen mindestens für die Gültigkeitsdauer des Zertifikats aufzubewahren?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Ja (1 Punkt)
        • Nein (0 Punkte)
        • Not applicable (0 Punkte)
      • Verfügt das System über ein Rückverfolgbarkeitssystem, das die Überprüfung des Produktflusses zwischen den Lieferkettenstufen ermöglicht?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Ja (1 Punkt)
        • Nein (0 Punkte)
        • Not applicable (0 Punkte)
    • Claims und Produktkennzeichnung
      4/5
      • Verfügt die standardsetzende Organisation über dokumentierte Anforderungen für die Verwendung von Symbolen, Logos und/oder Claims im Zusammenhang mit dem Standard und macht diese öffentlich zugänglich?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
        • Nicht anwendbar (0 Punkte)
      • Sind in den Kennzeichnungsrichtlinien die Arten von Claims festgelegt, die für verschiedene Arten von CoC-Modellen geltend gemacht werden können, wenn die standardsetzende Organisation mehr als ein Modell zulässt?
        Antwort: Not applicable
        Mögliche Antworten
        • Ja (1 Punkt)
        • Nein (0 Punkte)
        • Not applicable (0 Punkte)
      • Müssen Claims- und Label-Nutzer*innen eindeutige Lizenznummern oder andere Rückverfolgungsmechanismen verwenden?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Ja (1 Punkt)
        • Nein (0 Punkte)
        • Not applicable (0 Punkte)
      • Verlangt der Systeminhaber eine Überwachung der korrekten Verwendung von Claims und Kennzeichnungen auf dem Markt, einschließlich eines Beschwerdemechanismus zur Meldung von Missbrauch?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Ja (1 Punkt)
        • Nein (0 Punkte)
        • Not applicable (0 Punkte)
      • Ist das Etikett mit einer erklärenden Textaussage oder einem Link zu weiteren Informationen versehen?
        Antwort: Nein
        Punktzahl: 0/1
        Mögliche Antworten
        • Ja (1 Punkt)
        • Nein (0 Punkte)
        • Not applicable (0 Punkte)
      • Verfügt die standardsetzende Organisation über ein Verfahren, in dem spezifische Folgen bei Missbrauch von Claims festgelegt sind, und verlangen sie dies auch von ihren Konformitätsbewertungsstellen?
        Antwort: Ja
        Punktzahl: 1/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)

Umwelt­freundlichkeit 83%

  • Gefährliche Chemikalien - besonders besorgniserregende Stoffe gemäß REACH
  • Für die menschliche Gesundheit schädliche Chemikalien
  • Biologische Abbaubarkeit von Stoffen
  • Umweltschädliche Chemikalien
  • Chemikalienrückstände
  • Grenzwerte für Abwasserparameter
  • Vorgaben für die Produktion von Naturfasern
  • Verwendung von synthetischen Fasern
  • Chemikalien
    23/24
    • Verwendung von Chemikalien
      19/20
      • Beinhaltet der Standard Kriterien zur Verwendung von Chemikalien?
        Antwort: Basic: Document use of all chemicals
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/2
        Mögliche Antworten
        • Basic: Document use of all chemicals (1 Punkt)
        • Advanced: Increase efficiency/reduce chemical use (2 Punkte)

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must assure compliance with the applicable national and local legal environmental requirements applicable to their processing/manufacturing stages performed (including those referring to emissions to air, wastewater discharge as well as disposal of waste and sludge). They must have a written environmental policy and procedures in place to allow monitoring and improving rele-vant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: (...) - documentation of staff training in the conservation of water and energy, the proper and minimal use of chemicals and their correct disposal - programme for improvement Wet processing units must keep full records of the use of chemicals, energy, water consumption and waste water treatment, including the disposal of sludge. In particular they must continuously measure and monitor waste water temperature, waste water pH and sediment quantities. 2.4.13. Record keeping & internal quality assurance All operational procedures and practices must be documented by effective control systems and records that en-able tracing and verification of: • the origin, nature and quantities of organic and other (raw) materials, accessories as well as inputs which have been delivered to the unit • the flow of goods within the unit (processing/manufacturing steps performed, recipes used and stock quantities) • the composition of manufactured products • the nature, quantities and consignees of BEST Goods which have left the unit • any other information that may be required for the purposes of proper inspection of the operation re-cords relevant to the inspection.

        Referenzdokumente:

        page 15,16/40

      • Beinhaltet der Standard Kriterien zu gefährlichen Chemikalien, die auf der REACH Kandidatenliste als besonders besorgniserregende Stoffe gelistet sind?
        Antwort: Advanced: Prohibit use except for defined derogations.
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Basic: SVHC of Candidate List is prohibited but specific derogations/deviations/exceptions for a defined use OR lists prohibited/restricted substances based risk on an assessment (1 Punkt)
        • Advanced: Prohibit use except for defined derogations. (1 Punkt)

        Auszug aus dem Standard:

        2.3. General requirements for chemical inputs in all processing stages 2.3.1. Prohibited and restricted inputs The following table lists chemical inputs that may (potentially) be used in conventional textile processing but that are explicitly banned or restricted for environmental and/or toxicological reasons in all processing stages of IVN BEST Goods. Substance group - Criteria Substances and preparations having restrictions in usage for application in textiles with a recognised internationally or nationally legal character The same restrictions apply, provide the substances and preparations are not already prohibited or have stricter restrictions criteria according to this standard. Substances listed in regulation EC 552/2009 (amending regulation EC 1907/2006 (REACH), annex XVII), and the ‘candidate list of substances of very high concern for authorisation’ of the European Chemicals Agency (ECHA) are prohibited. 2.4.15. Limit values for residues in BEST Goods Even if produced in compliance with this standard textiles may carry traces of residues (e.g. due to unavoidable contamination). The following table lists the corresponding limit values for BEST Goods: Parameter Threshold Testing method

        Referenzdokumente:

        page 8,18/40

      • Enthält der Standard Kriterien für H-Sätze?
        Antwort: Advanced: Verbot der Verwendung
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 2/2
        Mögliche Antworten
        • Basic: Bei der Risikobewertung ODER der Auswahl von Stoffen für MRSL werden die H-Sätze berücksichtigt. (1 Punkt)
        • Advanced: Verbot der Verwendung (2 Punkte)

        Auszug aus dem Standard:

        2.3.2. Requirements related to hazards and toxicity Substance group Criteria Inputs that are assigned to specific risk phrases (hazard statements) related to health hazards Prohibited are: • substances which are classified with any of the following hazard state-ments, if applied as direct input • preparations which are classified with any of the following hazard statements /risk phrases • preparations which contain at least one substance which is classified with any of the following hazard statements (According to Global Harmoni-zation Standards (GHS), published by the United Nations, Appendix 3): H300 Very toxic if swallowed H310 Very toxic in contact with skin H330 Very toxic by inhalation H340 May cause heritable genetic damage H341 May likely cause heritable genetic damage H350 May cause cancer H351 May likely cause cancer H360 May impair fertility; may cause harm to the unborn child H361 May likely impair fertility; may cause harm to the unborn child H370 Damage to organs H371 May cause damage to organs H372 Danger of serious damage to health by prolonged exposure For inputs assessed according to the Global Harmonized System (GHS) the equivalent hazard statements apply (annex 3 of GHS). For inputs assessed according to the 'risk phrase' classification (Directive 67/548EEC, amended and appealed by Regulation EC 1272/2008) the equivalent risk phrases apply. 2.4.15. Limit values for residues in BEST Goods Even if produced in compliance with this standard textiles may carry traces of residues (e.g. due to unavoidable contamination). The following table lists the corresponding limit values for BEST Goods: Parameter Threshold Testing method

        Referenzdokumente:

        page 9, 18/40

      • Beinhaltet der Standard Kriterien zur Verwendung von Bioziden?
        Antwort: Advanced: Verbot der Verwendung von Bioziden bei der Textilveredelung
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 2/2
        Mögliche Antworten
        • Basic: Beschränkung der Verwendung von Bioziden in der Textilveredelung (1 Punkt)
        • Advanced: Verbot der Verwendung von Bioziden bei der Textilveredelung (2 Punkte)

        Auszug aus dem Standard:

        2.4.8. Finishing Parameter Criteria Selection of finishing methods and auxiliaries Allowed are mechanical, thermal and other physical finishing methods. (...) Prohibited in general is the use of synthetic inputs for anti-microbial finishing (in-cluding biocides), coating, filling and stiffening, lustring and matting as well as weighting. 2.4.12. Storage, packaging and transport (...) In as much as pesticides/biocides are required by national law for warehouses or transport containers, they must comply with the applicable international or national standard for organic farming.

        Referenzdokumente:

        page 13, 15/40

      • Beinhaltet der Standard Kriterien zur Verwendung von Formaldehyd?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.3. General requirements for chemical inputs in all processing stages 2.3.1. Prohibited and restricted inputs The following table lists chemical inputs that may (potentially) be used in conventional textile processing but that are explicitly banned or restricted for environmental and/or toxicological reasons in all processing stages of IVN BEST Goods. It is not to be seen as a comprehensive and inclusive list of all chemical inputs that are prohibited or restricted under IVN BEST. Prohibition or restriction of substance groups or individual substances that are not explicitly listed in this chapter may further result from chapter 2.3.2 ‘Requirements related to hazards and toxic-ity’ or from other criteria of this standard. Substance group - Criteria Formaldehyde and other short-chain aldehydes Prohibited are inputs that contain or generate formaldehyde or other short-chain aldehydes during designated application. 2.4.15. Limit values for residues in BEST Goods Even if produced in compliance with this standard textiles may carry traces of residues (e.g. due to unavoidable contamination). The following table lists the corresponding limit values for BEST Goods: Parameter Threshold Testing method Formaldehyde < 16 mg/kg Japanese Law 112 oder DIN EN ISO 14184-1

        Referenzdokumente:

        page 8, 18/40

      • Beinhaltet der Standard Kriterien zur Verwendung von Nanomaterialien?
        Antwort: Advanced: Verbot der Verwendung von Nanomaterialien
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Basic (0 Punkte)
        • Advanced: Verbot der Verwendung von Nanomaterialien (1 Punkt)

        Auszug aus dem Standard:

        2.3. General requirements for chemical inputs in all processing stages 2.3.1. Prohibited and restricted inputs The following table lists chemical inputs that may (potentially) be used in conventional textile processing but that are explicitly banned or restricted for environmental and/or toxicological reasons in all processing stages of IVN BEST Goods. Substance group - Criteria Inputs containing functional nano-particles (= particles with a size < 100 nm) - Prohibited

        Referenzdokumente:

        page 8/40

      • Beinhaltet der Standard Kriterien zur Verwendung von Flammschutzmitteln?
        Antwort: Advanced: Verbot der Verwendung
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Basic (0 Punkte)
        • Advanced: Verbot der Verwendung (1 Punkt)

        Auszug aus dem Standard:

        2.3. General requirements for chemical inputs in all processing stages 2.3.1. Prohibited and restricted inputs The following table lists chemical inputs that may (potentially) be used in conventional textile processing but that are explicitly banned or restricted for environmental and/or toxicological reasons in all processing stages of IVN BEST Goods. Substance group - Criteria Brominated and chlorinated flame retardants - Prohibited

        Referenzdokumente:

        page 7/40

      • Enthält der Standard Kriterien für die biologische Abbaubarkeit von Stoffen?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.3.2. Requirements related to hazards and toxicity Substance group - Criteria Inputs which are bio-accumulative and not rapidly degradable Prohibited are substances, if applied as direct input, and preparations clas-sified with H413: 'May cause long-lasting effects to aquatic life' (respective R53) that are both, ‘bio-accumulative’1) and not rapidly degradable²), ³) 1) A substance or preparation is considered as (potentially) bio-accumulative, if BCF (= bio-concentration factor) ≥ 500 or, if absent, log Kow (= logarithm of the n-octanol-water partition coefficient) ≥ 4 2) Testing requirement: >70% OECD 301A [28d] or equivalent testing method according to footnote 4 of the table below, except test methods related to eliminability (OECD 302). In those cases where only BOD and COD data are available the input is considered 'rapidly degradable' when the ratio of BOD5/COD is ≥ 0,5. 3) This criterion is not applicable to preparations whose very low solubility in water prevents their bioaccumulation (e.g. pigment preparations). All preparations applied must further comply with the following requirements: Parameter Criteria Relation of biodegradability / eliminability 4) to aquatic toxicity 3) Only allowed, if: < 70% and > 100 mg/l > 70% and > 10 mg/l > 95% and > 1 mg/l 3) Accepted testing methods [duration]: Performing new fish and daphnia tests to determine unknown LC50 / EC50 values in the course of the GOTS assessment procedure for inputs is prohibited. Instead alternative methods to OECD 203 [96hr] and EC50 daphnia, OECD 202 [48hr] (e.g. Acute Toxicity Estimates (ATE), validated structure-activity relationships, conclusion on analogy from similar products, calculation from available data of substances contained, fish egg test (embryo toxicity test (FET)), in vitro test) must be used to determine unknown values; IC50 algae, OECD 201 [72hr] 4) Accepted testing methods: OECD 301 A, OECD 301, E, ISO 7827, OECD 302 A, ISO 9887, OECD 302 B, ISO 9888 or OECD 303A; alternatively to meet the 70% level a preparation tested with one of the methods OECD 303A or ISO 11733 a percentage degradation of at least 80% must be shown - or if tested with one of the methods OECD 301 B, ISO 9439, OECD 301 C, OECD 302 C, OECD 301 D, ISO 10707, OECD 301 F, ISO 9408, ISO 10708 or ISO 14593 a per-centage degradation of at least 60% must be shown. To meet the 95% level, if tested with any of the mentioned methods a percentage degradation of 95% must be shown. Testing duration with each method is 28 days.

        Referenzdokumente:

        page 10/40

      • Enthält der Standard Kriterien zu den H-Sätzen H400, H410, H411?
        Antwort: Advanced: Verbot der Verwendung von H-Sätzen außer für die in dem Guidance aufgeführten Stoffgruppen
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 2/2
        Mögliche Antworten
        • Basic: Aufnahme von Anforderungen für eine ökologische Risikobewertung der verwendeten Stoffe ODER die Auswahl von Stoffen für MRSL berücksichtigt H-Sätze (1 Punkt)
        • Advanced: Verbot der Verwendung von H-Sätzen außer für die in dem Guidance aufgeführten Stoffgruppen (2 Punkte)

        Auszug aus dem Standard:

        2.3.2. Requirements related to hazards and toxicity Substance group - Criteria Inputs which are classified with specific haz-ard statements / risk phrases related to en-vironmental hazards Prohibited are: • substances which are classified with any of the following hazard state-ments / risk phrases, if applied as direct input • preparations which are classified with any of the following hazard statements/risk phrases a) according to the Global Harmonized System (GHS) the equivalent hazard statements apply (annex 3 of GHS): H400: Very toxic to aquatic organisms H410: Very toxic to aquatic life with long lasting effects H411: Toxic to aquatic life with long lasting effects For inputs assessed according to GHS, where the implementation system does not provide for the codified H-statements, the corresponding hazard classes and categories of GHS, annex 3 apply. For inputs assessed according to the 'risk phrase' classification (Directive 67/548EEC amended and ap-pealed by Regulation EC 1272/2008) the equivalent risk phrases apply. and b) in accordance with the codification system of the EU-GHS (Regulation EC 1272/2008): EUH059: Hazardous to the ozone layer and c) in accordance with the 'risk phrase' classification: R54: Toxic to flora R55: Toxic to fauna R56: Toxic to soil organisms R58: May cause long-term adverse effects in the environment 2.4.15. Limit values for residues in BEST Goods Even if produced in compliance with this standard textiles may carry traces of residues (e.g. due to unavoidable contamination). The following table lists the corresponding limit values for BEST Goods: Parameter Threshold Testing method

        Referenzdokumente:

        page 9/40

      • Enthält der Standard Anforderungen für die Prüfung des Endprodukts auf Chemikalienrückstände?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.4.15. Limit values for residues in BEST Goods Even if produced in compliance with this standard textiles may carry traces of residues (e.g. due to unavoidable contamination). The following table lists the corresponding limit values for BEST Goods: (...) 2.4.16. Limit values for residues in additional material and accessories Additional materials and accessories (in accordance with the criteria of chapter 2.4.9.) used for BEST Goods need to comply with the following limit values for residues: Parameter Criteria Testing method (...)

        Referenzdokumente:

        page 18-24/40

      • Enthält der Standard Anforderungen für gefährliche Chemikalien gemäß (1) dem Stockholmer Überein-kommen, (2) den WHO-Klassen 1A und B und (3) dem Rotterdam-Übereinkommen?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.3. General requirements for chemical inputs in all processing stages 2.3.1. Prohibited and restricted inputs The following table lists chemical inputs that may (potentially) be used in conventional textile processing but that are explicitly banned or restricted for environmental and/or toxicological reasons in all processing stages of IVN BEST Goods. Substance group - Criteria Substances and preparations that are prohibited for application in textiles with a recognised internationally or a nationally valid legal character Prohibited 2.4.15. Limit values for residues in BEST Goods Even if produced in compliance with this standard textiles may carry traces of residues (e.g. due to unavoidable contamination). The following table lists the corresponding limit values for BEST Goods: Parameter Threshold Testing method Glyoxal and other short-chain aldehydes (mono- and dialdehydes up to C6) < 20 mg/kg Extraction according to DIN EN ISO 14184-1, derivatisation and assignment: DIN EN ISO 17226-1 (HPLC)

        Referenzdokumente:

        page 8, 18/40

      • Enthält der Standard Anforderungen für die Verwendung von Farbstoffen oder Pigmenten, die Blei, Kupfer, Chrom, Nickel, Kadmium, Kobalt und Aluminium enthalten, in der Produktionsphase?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.3. General requirements for chemical inputs in all processing stages 2.3.1. Prohibited and restricted inputs The following table lists chemical inputs that may (potentially) be used in conventional textile processing but that are explicitly banned or restricted for environmental and/or toxicological reasons in all processing stages of IVN BEST Goods. Substance group - Criteria Plasticizers Prohibited are: PHA, phthalates, Bisphenol A and all other plasticizers with endocrine disrupting potential Inputs with halogen containing compounds Prohibited are inputs that contain > 1% permanent AOX. Exceptions valid for pigments are set in chapter 2.4.7. 2.4.15. Limit values for residues in BEST Goods Even if produced in compliance with this standard textiles may carry traces of residues (e.g. due to unavoidable contamination). The following table lists the corresponding limit values for BEST Goods: Parameter Threshold Testing method Chlorophenols (PCP, TeCP) < 0,01 mg/kg PCP< 0,01 mg/kg TeCP< 0,01 mg/kg TrCP< 0,2 mg/kg DCP< 0,5 mg/kg MCP< 0,5 mg/kg TCP Unwanted, under observation LFGB 82-02-08 (GC/MS) o-Phenylphenol (OPP) < 1,0 mg/kg Extraction in solvent GC/MS

        Referenzdokumente:

        page 8, 18/40

      • Enthält der Standard Anforderungen für das Verbot von Azofarbstoffen, die in der Produktionsphase aromatische Amine abspalten können, die für die menschliche Gesundheit schädlich sind?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.3. General requirements for chemical inputs in all processing stages 2.3.1. Prohibited and restricted inputs The following table lists chemical inputs that may (potentially) be used in conventional textile processing but that are explicitly banned or restricted for environmental and/or toxicological reasons in all processing stages of IVN BEST Goods. Substance group - Criteria Inputs (e.g. azo dyes and pigments) releasing carcinogenic arylamine compounds (MAK III, category 1,2,3,4) - Prohibited 2.4.15. Limit values for residues in BEST Goods Even if produced in compliance with this standard textiles may carry traces of residues (e.g. due to unavoidable contamination). The following table lists the corresponding limit values for BEST Goods: Parameter Threshold Testing method Disperse dyes (classified as allergenic or carcinogenic) < 30 mg/kg DIN 54231 (LC/MS) according to § 64 LFGB 82.02-10

        Referenzdokumente:

        page 8, 18/40

      • Enthält der Standard Anforderungen für die Verwendung von Chlorgas, elementarem Chlor und chlororganischen Verbindungen als Bleichmittel?
        Antwort: Advanced: Verwendung verboten
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 2/2
        Mögliche Antworten
        • Basic: Verwendung eingeschränkt (1 Punkt)
        • Advanced: Verwendung verboten (2 Punkte)

        Auszug aus dem Standard:

        2.4.5. Pre-treatment and other wet processing stages Treatment / process - Criteria Bleaches - Only on basis of oxygen (peroxides, ozone, etc.).

        Referenzdokumente:

        page 12/40

      • Beinhaltet der Standard Kriterien zur Verwendung von Quecksilber, Kadmium, Blei, Chrom VI?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.3. General requirements for chemical inputs in all processing stages 2.3.1. Prohibited and restricted inputs The following table lists chemical inputs that may (potentially) be used in conventional textile processing but that are explicitly banned or restricted for environmental and/or toxicological reasons in all processing stages of IVN BEST Goods. Substance group - Criteria Heavy metals - Additives must be free of heavy metals (see definition in appendix). Impu-rities occuring in production phases and deployed substances may not exceed the limits listed in appendix B. 2.4.15. Limit values for residues in BEST Goods Even if produced in compliance with this standard textiles may carry traces of residues (e.g. due to unavoidable contamination). The following table lists the corresponding limit values for BEST Goods: Parameter Threshold Testing method Heavy metals (eluate) mg/kg refer to the textile Antimone (Sb) < 0,2 mg/kg Arsenic (As) < 0,2 mg/kg Lead (Pb) < 0,2 mg/kg Cadmium (Cd) < 0,1 mg/kg Chromium (Cr) < 1,0 mg/kg Cobalt (Co) < 1,0 mg/kg Copper (Cu) < 25 mg/kg Nickel (Ni) < 1,0 mg/kg Mercury (Hg) < 0,02 mg/kg Selenium (Se) < 0,2 mg/kg Tin (Sn) < 2,0 mg/kg Elution corresponds to DIN EN ISO 105-E04, DIN EN ISO 17294-2 ( ICP-MS) Chromium VI (Cr-VI) < 0,5 mg/kg Elution, DIN EN ISO 105-E04, ISO 11083 page 31 Term Determined definition for IVN BEST Heavy metal free An input is considered as 'heavy metal free' if it does not contain heavy metals as a functional constituent and any impurities contained do not exceed the following limit values as set by ETAD: Antimony: 50ppm, Arsenic: 50ppm, Barium: 100ppm, Cadmium: 20ppm, Cobalt: 500ppm, Copper: 250ppm, Chromium: 100ppm, Iron: 2500ppm, Lead: 100 ppm, Manganese: 1000ppm, Nickel: 200ppm, Mercury: 4ppm, Selenium: 20ppm, Silver: 100ppm, Zinc: 1500ppm, Tin: 250ppm.

        Referenzdokumente:

        page 8, 19 31/40

    • Umgang mit gefährlichen Stoffen
      4/4
      • Beinhaltet der Standard Kriterien zu Lagerung und Kennzeichnung von Chemikalien?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.3.3. Assessment basis for chemical inputs All chemical inputs intended to be used to process BEST Goods are subject to approval by a BEST Approved Certi-fier prior to their usage. Preparations must have been evaluated and their trade names have to be registered on approved lists prior to their usage by a BEST Approved Certifier who is authorised by the IVN for the specific accreditation scope (ap-proval of textile auxiliary agents (chemical inputs) on positive lists). Approval must be applied by the applicable chemical producer or supplier of the preparations who receive con-formity documents (letters of approval) issued by the authorised certifiers and containing the trade names of applied preparations that have been found to be compliant with the criteria of this standard. For all chemical inputs (substances and preparations) a Material Safety Data Sheet (MSDS), prepared according to an applicable recognised norm or directive must be available. The Approved Certifiers are requested, where appropriate and felt necessary, to include further sources of infor-mation (such as additional toxicological and environmental data on specific components of the auxiliary agents, test reports, independent lab analysis and traceability checks of ingredients) in the assessment with the following exception for IVN BEST. It is the intent to develop of separate conformity documents (positive lists) for IVN BEST. Certified Entities must have copies of valid Letters of Approval on hand listing all preparations used in processing and manufacturing BEST Goods as verification proof that all colourants and textile auxiliaries used for BEST Goods are actually approved. 2.4.10. Environmental management All companies must assure compliance with the applicable national and local legal environmental requirements applicable to their processing/manufacturing stages performed (including those referring to emissions to air, wastewater discharge as well as disposal of waste and sludge). They must have a written environmental policy and procedures in place to allow monitoring and improving rele-vant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: - documentation of staff training in the conservation of water and energy, the proper and minimal use of chemicals and their correct disposal - programme for improvement Wet processing units must keep full records of the use of chemicals, energy, water consumption and waste water treatment, including the disposal of sludge. In particular they must continuously measure and monitor waste water temperature, waste water pH and sediment quantities.

        Referenzdokumente:

        page 11, 15/40

      • Beinhaltet der Standard Kriterien zur gezielten Anwendung von Chemikalien?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.3. General requirements for chemical inputs in all processing stages 2.3.1. Prohibited and restricted inputs The following table lists chemical inputs that may (potentially) be used in conventional textile processing but that are explicitly banned or restricted for environmental and/or toxicological reasons in all processing stages of IVN BEST Goods. It is not to be seen as a comprehensive and inclusive list of all chemical inputs that are prohibited or restricted under IVN BEST. Prohibition or restriction of substance groups or individual substances that are not explicitly listed in this chapter may further result from chapter 2.3.2 ‘Requirements related to hazards and toxic-ity’ or from other criteria of this standard. Substances and preparations that are prohibited for application in textiles with a recognised internationally or a nationally valid legal character Prohibited Substances and preparations having restrictions in usage for application in textiles with a recognised internationally or nationally legal character The same restrictions apply, provide the substances and preparations are not already prohibited or have stricter restrictions criteria according to this standard. Substances listed in regulation EC 552/2009 (amending regulation EC 1907/2006 (REACH), annex XVII), and the ‘candidate list of substances of very high concern for authorisation’ of the European Chemicals Agency (ECHA) are prohibited. 2.3.3. Assessment basis for chemical inputs All chemical inputs intended to be used to process BEST Goods are subject to approval by a BEST Approved Certi-fier prior to their usage. Preparations must have been evaluated and their trade names have to be registered on approved lists prior to their usage by a BEST Approved Certifier who is authorised by the IVN for the specific accreditation scope (ap-proval of textile auxiliary agents (chemical inputs) on positive lists). Approval must be applied by the applicable chemical producer or supplier of the preparations who receive con-formity documents (letters of approval) issued by the authorised certifiers and containing the trade names of applied preparations that have been found to be compliant with the criteria of this standard. For all chemical inputs (substances and preparations) a Material Safety Data Sheet (MSDS), prepared according to an applicable recognised norm or directive must be available. The Approved Certifiers are requested, where appropriate and felt necessary, to include further sources of infor-mation (such as additional toxicological and environmental data on specific components of the auxiliary agents, test reports, independent lab analysis and traceability checks of ingredients) in the assessment with the following exception for IVN BEST. It is the intent to develop of separate conformity documents (positive lists) for IVN BEST. Certified Entities must have copies of valid Letters of Approval on hand listing all preparations used in processing and manufacturing BEST Goods as verification proof that all colourants and textile auxiliaries used for BEST Goods are actually approved.

        Referenzdokumente:

        page 7/40

      • Beinhaltet der Standard Kriterien zu Schulungen zum Umgang und zum Kontakt mit Chemikalien?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must assure compliance with the applicable national and local legal environmental requirements applicable to their processing/manufacturing stages performed (including those referring to emissions to air, wastewater discharge as well as disposal of waste and sludge). They must have a written environmental policy and procedures in place to allow monitoring and improving rele-vant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: (...) - documentation of staff training in the conservation of water and energy, the proper and minimal use of chemicals and their correct disposal - programme for improvement

        Referenzdokumente:

        page 15/40

      • Beinhaltet der Standard Kriterien zu spezifischen Verfahren / Kontrollen zum Umgang mit Verschmutzungsvorfälle (zur Eindämmung der Auswirkungen auf die Umwelt)?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must (…) have a written environmental policy and procedures in place to allow monitoring and improving relevant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: (…) - procedures to follow in case of waste and pollution incidents

        Referenzdokumente:

        page 15/40

  • Wasser
    6/7
    • Wassernutzung
      2/2
      • Beinhaltet der Standard Kriterien zum Wasserverbrauch in der Produktionsphase?
        Antwort: Advanced: Überwachung sowie Steigerung der Effizienz des Wasserverbrauchs
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 2/2
        Mögliche Antworten
        • Basic: Kontinuierliche Überwachung des Wasserverbrauchs (1 Punkt)
        • Advanced: Überwachung sowie Steigerung der Effizienz des Wasserverbrauchs (2 Punkte)

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must (…) have a written environmental policy and procedures in place to allow monitoring and improving relevant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: (...) - data on energy and water resources and their consumption per kg of textile output - target goals and procedures to reduce energy and water consumption per kg of textile output (...) Wet processing units must keep full records of the use of chemicals, energy, water consumption and waste water treatment, including the disposal of sludge. In particular they must continuously measure and monitor waste water temperature, waste water pH and sediment quantities.

        Referenzdokumente:

        page 15/40

    • Abwasser
      4/5
      • Beinhaltet der Standard Kriterien zu Abwasserqualität und Abwasseraufbereitung?
        Antwort: Advanced: Klärung des Abwassers mit Parametern, die für die Sicherstellung der entsprechenden Abwasserqualität festgelegt wurden
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 2/2
        Mögliche Antworten
        • Basic: Klärung des Abwassers (1 Punkt)
        • Advanced: Klärung des Abwassers mit Parametern, die für die Sicherstellung der entsprechenden Abwasserqualität festgelegt wurden (2 Punkte)

        Auszug aus dem Standard:

        2.4.11. Wastewater treatment Wastewater from all wet processing units must be treated in an internal or external functional wastewater treat-ment plant before discharged to environment. The applicable national and local legal requirements for waste water treatment - including limit values with regard to pH, temperature, TOC, BOD, COD, colour removal, resi-dues of (chemical) pollutants and discharge routes - must be fulfilled. Wastewater discharges to the environment must not exceed 20 g COD/kg of processed textile (output). For scouring greasy wool an exceptional limit of 45 g COD/kg applies. Treatment of wastewater from water retting of bast fibres must achieve a reduction of COD (or TOC) of at least 95% for hemp fibres and 75% for all other bast fibres. Wastewater discharges to surface waters further must have a pH between 6 and 9 (unless the pH of the receiving water is outside this range) and a temperature of less than 35C° (unless the temperature of the receiving water is above this value). Wastewater analyses must be performed and documented periodically at normal operating capacity.

        Referenzdokumente:

        page 15/40

      • Beinhaltet der Standard Kriterien zu Abwasservolumen (je Produktionseinheit)?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must (…) have a written environmental policy and procedures in place to allow monitoring and improving relevant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: (…) - data on energy and water resources and their consumption per kg of textile output - target goals and procedures to reduce energy and water consumption per kg of textile output

        Referenzdokumente:

        page 15/40

      • Beinhaltet der Standard Grenzwerte zu grundlegenden Abwasserparametern?
        Antwort: Basic: The scheme refers to national legislation.
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Basic: The scheme refers to national legislation. (1 Punkt)
        • Advanced: The schemes requires threshold values on basic wastewater parametersfor different production steps. (1 Punkt)

        Auszug aus dem Standard:

        2.4.11. Wastewater treatment Wastewater from all wet processing units must be treated in an internal or external functional wastewater treat-ment plant before discharged to environment. The applicable national and local legal requirements for waste water treatment - including limit values with regard to pH, temperature, TOC, BOD, COD, colour removal, resi-dues of (chemical) pollutants and discharge routes - must be fulfilled. Wastewater discharges to the environment must not exceed 20 g COD/kg of processed textile (output). For scouring greasy wool an exceptional limit of 45 g COD/kg applies. Treatment of wastewater from water retting of bast fibres must achieve a reduction of COD (or TOC) of at least 95% for hemp fibres and 75% for all other bast fibres. Wastewater discharges to surface waters further must have a pH between 6 and 9 (unless the pH of the receiving water is outside this range) and a temperature of less than 35C° (unless the temperature of the receiving water is above this value). Wastewater analyses must be performed and documented periodically at normal operating capacity.

        Referenzdokumente:

        page 15

      • Beinhaltet der Standard Grenzwerte zu erweiterten Abwasserparametern?
        Antwort: Nein
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten

        Referenzdokumente:

        page 15 (note: advanced parameters are covered in version 6.0, not longer in version 6.1)

  • Materialeinsatz
    6/7
    • Fasern
      6/7
      • Enthält der Standard Kriterien für die Herstellung von Naturfasern?
        Antwort: Advanced: Mindestens 51 % der Fasern sind bio oder in der Umstellung zu bio (nicht bio Naturfasern müssen auf Rückstände von Agrochemikalien untersucht werden).
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 2/2
        Mögliche Antworten
        • Basic: Die Fasern werden stichprobenartig auf Rückstände von Agrochemikalien untersucht UND gefährliche Pestizide, wie in den Leitlinien beschrieben, sind verboten. (1 Punkt)
        • Advanced: Mindestens 51 % der Fasern sind bio oder in der Umstellung zu bio (nicht bio Naturfasern müssen auf Rückstände von Agrochemikalien untersucht werden). (2 Punkte)

        Auszug aus dem Standard:

        2.1. Requirements for organic fibre production Allowed are certified organic natural fibres (kbA/kbT) produced im compliance with EC Organic Regulation EC 834/2007, the USDA National Organic Program (NOP), or another (different) Standard of the 'IFOAM Family of Standards' certified for the relevant scope of production (crop production or animal husbandry). The certification body must have a valid and recognised accreditation for the standard it certifies. Recognised accreditations are ISO 17065 accreditation, NOP accreditation, IFOAM accreditation and IFOAM Global Organic System accreditation. 2.2. Requirements for material composition 2.2.1. Products sold, labelled or represented as “NATURTEXTIL IVN certified BEST” 100 % of the fibre content of the products - excluding accessories (definition see annex) - must be of certified organic origin. (...)

        Referenzdokumente:

        page 7/40

      • Enthält der Standard spezifische Kriterien für verschiedene Arten von synthetischen Fasern (einschließlich künstlicher Zellulosefasern)?
        Antwort: Advanced: Der Standard formuliert spezifische Kriterien für die nachhaltige Produktion von Kunstfasern ODER behandelt die nachhaltige Beschaffung von Kunstfasern.
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Basic: Nicht anwendbar (für Systeme, die weniger als 10% synthetische Fasern enthalten) (0 Punkte)
        • Advanced: Der Standard formuliert spezifische Kriterien für die nachhaltige Produktion von Kunstfasern ODER behandelt die nachhaltige Beschaffung von Kunstfasern. (1 Punkt)

        Auszug aus dem Standard:

        2.1. Requirements for organic fibre production Allowed are certified organic natural fibres (kbA/kbT) produced im compliance with EC Organic Regulation EC 834/2007, the USDA National Organic Program (NOP), or another (different) Standard of the 'IFOAM Family of Standards' certified for the relevant scope of production (crop production or animal husbandry). The certification body must have a valid and recognised accreditation for the standard it certifies. Recognised accreditations are ISO 17065 accreditation, NOP accreditation, IFOAM accreditation and IFOAM Global Organic System accreditation. 2.2. Requirements for material composition 2.2.1. Products sold, labelled or represented as “NATURTEXTIL IVN certified BEST” 100 % of the fibre content of the products - excluding accessories (definition see annex) - must be of certified organic origin. C) List of additional fibres The following regenerated and synthetic fibre materials may be included in the remaining balance as detailed in chapter 2.2.1 resp. 2.2.2. They may be mixed with the organic fibres or used in certain details: a) Regenerated cellulose fibres - viscose, acetate, tencell and lyocell; b) Polyester; c) Polyurethane (Elasthan); d) Polyamide

        Referenzdokumente:

        page 7, 32 /40

      • Beinhaltet der Standard Kriterien zur Verwendung von recycelten Materialien?
        Antwort: Basic: Verwendung von recyceltem Material in der Verpackung
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/2
        Mögliche Antworten
        • Basic: Verwendung von recyceltem Material in der Verpackung (1 Punkt)
        • Advanced: Verwendung von recyceltem Material im Produkt (2 Punkte)

        Auszug aus dem Standard:

        2.4.12. Storage, packaging and transport Packaging material must not contain chlorinated plastics (e.g. PVC). Any paper or cardboard used in packaging material for the retail sale of BEST goods (including labelling items such as hang tags or swing tags) must be recy-cled from pre- or post-consumer waste or certified according to a program that verifies compliance with sustain-able forestry management principles.

        Referenzdokumente:

        page 15/40

      • Enthält der Standard Anforderungen für die Verwendung von genetisch veränderten Organismen (GVO)?
        Antwort: Advanced: Verwendung verbieten
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 2/2
        Mögliche Antworten
        • Basic: Verwendung mit angemessenen Kontrollen zur Verhinderung von Kontaminationen zulassen (1 Punkt)
        • Advanced: Verwendung verbieten (2 Punkte)

        Auszug aus dem Standard:

        2.3. General requirements for chemical inputs in all processing stages 2.3.1. Prohibited and restricted inputs The following table lists chemical inputs that may (potentially) be used in conventional textile processing but that are explicitly banned or restricted for environmental and/or toxicological reasons in all processing stages of IVN BEST Goods. Substance group - Criteria Genetically modified organisms (GMO) Prohibited are all inputs that: - contain GMO - contain enzymes derived from GMO - are made from GMO raw materials (e.g. starch, surfactants or oils from GM plants)

        Referenzdokumente:

        page 8/40

  • Qualität
    2/2
    • Qualität und Gebrauchstauglichkeit
      2/2
      • Beinhaltet der Standard Kriterien für die Qualität von Textilien?
        Antwort: Advanced: All four aspects (fastness of rubbing/ perspiration/ light/ washing) are tested
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 2/2
        Mögliche Antworten
        • Basic: Less than four aspects are tested textile (1 Punkt)
        • Advanced: All four aspects (fastness of rubbing/ perspiration/ light/ washing) are tested (2 Punkte)

        Auszug aus dem Standard:

        2.4.14. Technical quality parameters Any final product labeled according to this standard should comply with the following technical quality parameters. Information about any (potential) non-compliance(s) must be indicated by the licensee of the final product in the product declaration. Parameter Critera Test method Rubbing fastness, dry 3-4 ISO 105x12; DIN 54021 for fibre blends 3 ISO 105x12; DIN 54021 Rubbing fastness, wet 2 ISO 105x12; DIN 54021 Perspiration fastness, alkaline and acid 3-4 ISO 105 E04; DIN 54020 Foe fibre blends 3 ISO 105 E04; DIN 54020 Light fastness 3-4 ISO 105 B02; DIN 54004 Dimensional changes after washing at 40°C resp. at 30°C for animal fibre material and blends thereof. This criterion is only valid for the garment sector: knitted/hosiery max. 8%. DIN EN ISO 6330 woven max. 3%. DIN EN ISO 6330 Saliva fastness 5 LFGB B 82. 10-1; DIN 53160-1 Washing fastness when washed at 60°C 3-4 ISO 105 C06 C1M, DIN 54010 Washing fastness of animal fibre material and blends thereof when washed at 30° 3-4 ISO 105 C06 A1S without use of steel balls

        Referenzdokumente:

        page 16/40

  • Energie & Klima
    2/2
    • Klimaschutz
      2/2
      • Beinhaltet der Standard Kriterien zum Energieverbrauch in der Herstellungsphase?
        Antwort: Advanced: Verbrauchsreduzierung, Effizienzsteigerung ODER verstärkte Nutzung erneuerbarer Energien
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 2/2
        Mögliche Antworten
        • Basic: Überwachung des Energieverbrauchs im Zeitverlauf (1 Punkt)
        • Advanced: Verbrauchsreduzierung, Effizienzsteigerung ODER verstärkte Nutzung erneuerbarer Energien (2 Punkte)

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must (…) have a written environmental policy and procedures in place to allow monitoring and improving relevant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: (…) - data on energy and water resources and their consumption per kg of textile output - target goals and procedures to reduce energy and water consumption per kg of textile output - documentation of staff training in the conservation of water and energy, the proper and minimal use of chemicals and their correct disposal - programme for improvement Wet processing units must keep full records of the use of chemicals, energy, water consumption and waste water treatment, including the disposal of sludge. In particular they must continuously measure and monitor waste water temperature, waste water pH and sediment quantities.

        Referenzdokumente:

        page 14

  • Abfall & Luftverschmutzung
    8/12
    • Abfallmanagement
      6/9
      • Enthält der Standard Anforderungen an das Abfallvolumen?
        Antwort: Advanced: Verringerung des Abfallvolumens
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Basic (0 Punkte)
        • Advanced: Verringerung des Abfallvolumens (1 Punkt)

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must (…) have a written environmental policy and procedures in place to allow monitoring and improving relevant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: (…) - monitoring of waste and discharges - procedures to minimise waste and discharges - procedures to follow in case of waste and pollution incidents

        Referenzdokumente:

        page 15

      • Enthält der Standard Kriterien zu giftigem Abfall?
        Antwort: Advanced: Reduce and/or treat toxic waste
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Basic (0 Punkte)
        • Advanced: Reduce and/or treat toxic waste (1 Punkt)

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must (…) have a written environmental policy and procedures in place to allow monitoring and improving relevant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: 2.4.11. Wastewater treatment Wastewater from all wet processing units must be treated in an internal or external functional wastewater treat-ment plant before discharged to environment. The applicable national and local legal requirements for waste water treatment - including limit values with regard to pH, temperature, TOC, BOD, COD, colour removal, resi-dues of (chemical) pollutants and discharge routes - must be fulfilled. Wastewater discharges to the environment must not exceed 20 g COD/kg of processed textile (output). For scouring greasy wool an exceptional limit of 45 g COD/kg applies. Treatment of wastewater from water retting of bast fibres must achieve a reduction of COD (or TOC) of at least 95% for hemp fibres and 75% for all other bast fibres. Wastewater discharges to surface waters further must have a pH between 6 and 9 (unless the pH of the receiving water is outside this range) and a temperature of less than 35C° (unless the temperature of the receiving water is above this value). Wastewater analyses must be performed and documented periodically at normal operating capacity. (…) - procedures to follow in case of waste and pollution incidents - documentation of staff training in the conservation of water and energy, the proper and minimal use of chemicals and their correct disposal - programme for improvement Wet processing units must keep full records of the use of chemicals, energy, water consumption and waste water treatment, including the disposal of sludge. In particular they must continuously measure and monitor waste water temperature, waste water pH and sediment quantities.

        Referenzdokumente:

        page 15/40

      • Enthält der Standard Anforderungen für die Wiederverwendung oder das Recycling von Abfällen vor Ort?
        Antwort: Nein
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten
      • Beinhaltet der Standard Kriterien zum Abfallmanagement in der Herstellungsphase?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must assure compliance with the applicable national and local legal environmental requirements applicable to their processing/manufacturing stages performed (including those referring to emissions to air, wastewater discharge as well as disposal of waste and sludge). They must have a written environmental policy and procedures in place to allow monitoring and improving rele-vant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: (...) - monitoring of waste and discharges - procedures to minimise waste and discharges - procedures to follow in case of waste and pollution incidents - documentation of staff training in the conservation of water and energy, the proper and minimal use of chemicals and their correct disposal - programme for improvement Wet processing units must keep full records of the use of chemicals, energy, water consumption and waste water treatment, including the disposal of sludge. In particular they must continuously measure and monitor waste water temperature, waste water pH and sediment quantities. On-site burning of waste or uncontrolled waste land-fill is prohibited.

        Referenzdokumente:

        page 14, 15/40

      • Beinhaltet der Standard Kriterien zur Abfalltrennung?
        Antwort: Nein
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten
      • Beinhaltet der Standard Kriterien zur sicheren Entsorgung von gefährlichem Abfall?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must (…) have a written environmental policy and procedures in place to allow monitoring and improving relevant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: (…) - monitoring of waste and discharges - procedures to minimise waste and discharges - procedures to follow in case of waste and pollution incidents - documentation of staff training in the conservation of water and energy, the proper and minimal use of chemicals and their correct disposal - programme for improvement Wet processing units must keep full records of the use of chemicals, energy, water consumption and waste water treatment, including the disposal of sludge. In particular they must continuously measure and monitor waste water temperature, waste water pH and sediment quantities. 2.4.11. Wastewater treatment Wastewater from all wet processing units must be treated in an internal or external functional wastewater treat-ment plant before discharged to environment. The applicable national and local legal requirements for waste water treatment - including limit values with regard to pH, temperature, TOC, BOD, COD, colour removal, resi-dues of (chemical) pollutants and discharge routes - must be fulfilled. Wastewater discharges to the environment must not exceed 20 g COD/kg of processed textile (output). For scouring greasy wool an exceptional limit of 45 g COD/kg applies. Treatment of wastewater from water retting of bast fibres must achieve a reduction of COD (or TOC) of at least 95% for hemp fibres and 75% for all other bast fibres. Wastewater discharges to surface waters further must have a pH between 6 and 9 (unless the pH of the receiving water is outside this range) and a temperature of less than 35C° (unless the temperature of the receiving water is above this value). Wastewater analyses must be performed and documented periodically at normal operating capacity.

        Referenzdokumente:

        page 14/40

      • Beinhaltet der Standard Kriterien zu unkontrollierter Abfallverbrennung am Standort?
        Antwort: Advanced: Verbot der Abfallverbrennung
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Basic (0 Punkte)
        • Advanced: Verbot der Abfallverbrennung (1 Punkt)

        Auszug aus dem Standard:

        2.4.10. Environmental management (...) On-site burning of waste or uncontrolled waste land-fill is prohibited.

        Referenzdokumente:

        page 15

      • Beinhaltet der Standard Kriterien zu unkontrollierter Deponierung von Abfällen?
        Antwort: Advanced: Prohibit waste landfilling
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Basic (0 Punkte)
        • Advanced: Prohibit waste landfilling (1 Punkt)

        Auszug aus dem Standard:

        2.4.10. Environmental management On-site burning of waste or uncontrolled waste land-fill is prohibited.

        Referenzdokumente:

        page 15

      • Beinhaltet der Standard Kriterien zur Behandlung oder Entsorgung von Abfall durch Dritte?
        Antwort: Keine Informationen vorhanden
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten
        • Basic (0 Punkte)
        • Advanced: Keep records on third party contractors (1 Punkt)

        Auszug aus dem Standard:

        Anmerkung: Zentraleuropäischer Standard; Aspekt wird über nationale Gesetzgebung abgedeckt

    • Luftverschmutzung (exkl. Treibhausgase) & Immissionen
      2/3
      • Enthält der Standard Anforderungen zu Luftverschmutzung?
        Antwort: Basic: Überwachung der Emissionen
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/2
        Mögliche Antworten
        • Basic: Überwachung der Emissionen (1 Punkt)
        • Advanced: End-of-Pipe-Technologie (2 Punkte)

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must assure compliance with the applicable national and local legal environmental requirements applicable to their processing/manufacturing stages performed (including those referring to emissions to air, wastewater discharge as well as disposal of waste and sludge). They must have a written environmental policy and procedures in place to allow monitoring and improving rele-vant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: (...) - procedures to follow in case of waste and pollution incidents - documentation of staff training in the conservation of water and energy, the proper and minimal use of chemicals and their correct disposal - programme for improvement Wet processing units must keep full records of the use of chemicals, energy, water consumption and waste water treatment, including the disposal of sludge. In particular they must continuously measure and monitor waste water temperature, waste water pH and sediment quantities. On-site burning of waste or uncontrolled waste land-fill is prohibited.

        Referenzdokumente:

        page 14/40

      • Für welche Produktionsphase enthält der Standard Anforderungen zu Luftverschmutzung?
        Antwort: Advanced: Restrictions on air pollution for some of the production steps
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Basic (0 Punkte)
        • Advanced: Restrictions on air pollution for some of the production steps (1 Punkt)

        Auszug aus dem Standard:

        1.1. Aim of the standard The aim of this standard is to define requirements to ensure the sustainable status of textiles, from harvesting of the raw materials through environmentally and socially responsible manufacturing up to labelling in order to pro-vide a credible assurance to the final consumer. 2.4.10. Environmental management All companies must assure compliance with the applicable national and local legal environmental requirements applicable to their processing/manufacturing stages performed (including those referring to emissions to air, wastewater discharge as well as disposal of waste and sludge). They must have a written environmental policy and procedures in place to allow monitoring and improving rele-vant environmental performances in their facilities. Depending on the processing/manufacturing stages per-formed, the available data and procedures need to include: - person responsible - data on energy and water resources and their consumption per kg of textile output - target goals and procedures to reduce energy and water consumption per kg of textile output - monitoring of waste and discharges - procedures to minimise waste and discharges - procedures to follow in case of waste and pollution incidents - documentation of staff training in the conservation of water and energy, the proper and minimal use of chemicals and their correct disposal - programme for improvement

        Referenzdokumente:

        page 5, 15/40

  • Umweltmanagement
    2/5
    • Umweltmanagement
      2/5
      • Beinhaltet der Standard ein allgemeines Kriterium zur Einhaltung aller relevanten lokalen, regionalen und nationalen Umweltgesetze und -vorschriften?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must assure compliance with the applicable national and local legal environmental requirements applicable to their processing/manufacturing stages performed (including those referring to emissions to air, wastewater discharge as well as disposal of waste and sludge).

        Referenzdokumente:

        page 14/40

      • Beinhaltet der Standard Anforderungen, die sicherstellen, dass relevante und aktuelle Genehmigungen vorliegen (z. B. Wassernutzungsrechte oder Landnutzungstitel)?
        Antwort: Nein
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 0/1
        Mögliche Antworten
        • Nein (0 Punkte)
        • Ja (1 Punkt)
        • Nicht anwendbar (0 Punkte)

        Auszug aus dem Standard:

        2.4.10. Environmental management All companies must assure compliance with the applicable national and local legal environmental requirements applicable to their processing/manufacturing stages performed (including those referring to emissions to air, wastewater discharge as well as disposal of waste and sludge).

        Referenzdokumente:

        page 14/40

      • Beinhaltet der Standard Kriterien zur Minderung negativer Auswirkungen auf die Umwelt vor Aufnahme der Produktion / den Arbeiten?
        Antwort: Nein
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten
      • Beinhaltet der Standard Kriterien zur Bewertung der Umweltrisiken und der Auswirkungen der Produktion / Aktivitäten, bevor Geschäftstätigkeit / Anbau und Infrastruktur beträchtlich verstärkt oder ausgebaut werden?
        Antwort: Nein
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten
      • Enthält der Standard Anforderungen für die Einbeziehung von Interessengruppen zur Erreichung von Umweltzielen?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

Sozial­verträglichkeit 52%

  • Vereinigungsfreiheit
  • Kollektivverhandlungen
  • Arbeitsverträge
  • Arbeitnehmendenvertretungen bei gesetzlich eingeschränkter Vereinigungsfreiheit
  • Verbot der Zwangsarbeit
  • Verbot der Schuldknechtschaft
  • Verbot der Einbehaltung persönlicher Dokumente (z.B. Pass)
  • Bewegungsfreiheit
  • Mindestalter/ ILO 138
  • Verifizierung des Alters
  • Verbot der schlimmsten Formen von Kinderarbeit/ILO 182
  • Gleiche Entlohnung/ILO 100
  • Mutterschutz
  • Nichtdiskriminierung
  • Rechtmäßigkeit des Unternehmens
  • Zahlung des gesetzlichen Mindestlohns
  • Geregelte Arbeitszeiten
  • Rechte und Leistungen für Subunternehmer
  • Verbot der Belästigung und Misshandlung
  • Gesundheit und Sicherheit am Arbeitsplatz/ ILO 155
  • Bedingungen am Arbeitsplatz
  • Zugang zu Trinkwasser
  • Verbesserte Sanitäreinrichtungen
  • Gebäudesicherheit
  • Vorbereitung auf Brandfälle
  • Notfall- und Evakuierungssicherheit
  • Unternehmerische Verantwortung
    0/3
    • Verlangt der Standard Maßnahmen, die auf die Schaffung gleicher wirtschaftlicher Chancen für Frauen und Männer abzielen?
      Antwort: Nein
      Verbindlichkeitsgrad: Nicht erfu00fcllt
      Punktzahl: 0/1
      Mögliche Antworten
    • Enthält der Standard Kriterien zur Bewertung der Auswirkungen der Geschäftstätigkeit auf die Menschenrechte?
      Antwort: Keine Informationen vorhanden
      Verbindlichkeitsgrad: Nicht erfu00fcllt
      Punktzahl: 0/2
      Mögliche Antworten
      • Basic: Menschenrechtliche Sorgfaltspflicht ODER soziale Sorgfaltspflicht (1 Punkt)
      • Advanced: Menschenrechtliche Sorgfaltspflicht UND soziale Sorgfaltspflicht (2 Punkte)
  • Arbeiterrechte
    38/56
    • ILO Kernarbeitsnormen
      7/8
      • Beinhaltet der Standard Kriterien für die Vereinigungsfreiheit und das Organisationsrecht gemäß ILO 87?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/2
        Mögliche Antworten

        Auszug aus dem Standard:

        3.3. Freedom of association and the right to collective bargaining are respected Workers, without distinction, have the right to join or form trade unions of their own choosing and to bargain collectively. The employer adopts an open attitude towards the activities of trade unions and their organisational activities. Workers representatives are not discriminated against and have access to carry out their representative functions in the workplace. Where the right to freedom of association and collective bargaining is restricted under law, the employer facili-tates, and does not hinder, the development of parallel means for independent and free association and bargain-ing. The employer allows workers to freely elect their own representatives with whom the company can enter into dialogue about related issues.

        Referenzdokumente:

        page 24/40

      • Beinhaltet der Standard Kriterien für das Recht auf Kollektivverhandlungen gemäß ILO 98?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        3.3. Freedom of association and the right to collective bargaining are respected Workers, without distinction, have the right to join or form trade unions of their own choosing and to bargain collectively. The employer adopts an open attitude towards the activities of trade unions and their organisational activities. Workers representatives are not discriminated against and have access to carry out their representative functions in the workplace. Where the right to freedom of association and collective bargaining is restricted under law, the employer facili-tates, and does not hinder, the development of parallel means for independent and free association and bargain-ing. The employer allows workers to freely elect their own representatives with whom the company can enter into dialogue about related issues.

        Referenzdokumente:

        page 24/40

      • Verbietet der Standard Zwangsarbeit gemäß ILO 29 und 105?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        3.2. Employment is freely chosen There is no servitude, forced, bonded or indentured labour.

        Referenzdokumente:

        page 24

      • Beinhaltet der Standard Kriterien für das Verbot von Kinderarbeit gemäß ILO 138?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        3. 4. Child labour is prohibited The employment of people under 16 is prohibited. If the employment serves training purposes, does not endan-ger the health and development of the person or is short-termed (maximum 50 working days per calendar year), exceptions can be made. (...) These policies and procedures including the interpretation of the terms "child" and "child labour" must conform to the provisions of the relevant ILO conventions C138 and C182.

        Referenzdokumente:

        Naturtextil BEST Version 6.0 - 3.5. Es wird keine Kinderarbeit verrichtet

      • Beinhaltet der Standard Kriterien zur Prävention der schlimmsten Formen von Kinderarbeit gemäß ILO 182?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        3. 4. Child labour is prohibited The employment of people under 16 is prohibited. If the employment serves training purposes, does not endan-ger the health and development of the person or is short-termed (maximum 50 working days per calendar year), exceptions can be made. (...) These policies and procedures including the interpretation of the terms "child" and "child labour" must conform to the provisions of the relevant ILO conventions C138 and C182.

        Referenzdokumente:

        page 24/40

      • Beinhaltet der Standard Kriterien zur Zahlung gleicher Löhne gemäß ILO-Konvention 100?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        3.5. No discriminatory practices There is to be no form of discrimination e.g. in hiring, compensation, access to training, promotion, termination or retirement based on race, caste, ethnic or national origin, nationality, religion, age, disability, gender, marital status, sexual orientation, union membership, political affiliation, or social background.

        Referenzdokumente:

        page 25

      • Beinhaltet der Standard Kriterien für die Nichtdiskriminierung am Arbeitsplatz gemäß ILO Konvention 111?
        Antwort: Ja
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten

        Auszug aus dem Standard:

        3.5. No discriminatory practices There is to be no form of discrimination e.g. in hiring, compensation, access to training, promotion, termination or retirement based on race, caste, ethnic or national origin, nationality, religion, age, disability, gender, marital status, sexual orientation, union membership, political affiliation, or social background.

        Referenzdokumente:

        page 25/40

    • Arbeitnehmerrechte
      20/31
      • Sonstige Arbeitnehmerrechte
        5/5
        • Beinhaltet der Standard Kriterien für die Bildung von Arbeitnehmendenvertretungen, wenn die Vereinigungsfreiheit gesetzlich eingeschränkt ist?
          Antwort: Advanced: Gefördert
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 2/2
          Mögliche Antworten
          • Basic: Erlaubt (1 Punkt)
          • Advanced: Gefördert (2 Punkte)

          Auszug aus dem Standard:

          3.3. Freedom of association and the right to collective bargaining are respected (...) Where the right to freedom of association and collective bargaining is restricted under law, the employer facili-tates, and does not hinder, the development of parallel means for independent and free association and bargain-ing. The employer allows workers to freely elect their own representatives with whom the company can enter into dialogue about related issues.

          Referenzdokumente:

          page 24/40

        • Beinhaltet der Standard Kriterien zu den Beschwerdemechanismen für Arbeitnehmer?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          3.11. Social Compliance Management Operators must have a policy for social accountability to ensure that the social criteria can be met. They must support the implementation and monitoring of the social criteria by: • recording and investigating complaints from workers or third parties related to the adherence to the social criteria and maintaining records about any necessary corrective measures arising from them

          Referenzdokumente:

          page 27/40

        • Enthält der Standard Anforderungen an die Einführung von Strategien oder Verfahren zur Einhaltung grundlegender Arbeitnehmerrechte am Arbeitsplatz?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          3.11. Social Compliance Management Operators must have a policy for social accountability to ensure that the social criteria can be met. They must support the implementation and monitoring of the social criteria by: • designating a person responsible for social accountability • monitoring compliance with the social criteria and implementing necessary improvements at its facilities • informing workers of minimum social criteria and any other related information provided by IVN in the ap-plicable local language(s) (...) • allowing workers to nominate a representative for social accountability that is able to provide feedback to the management regarding implementation status of and compliance with social criteria • recording and investigating complaints from workers or third parties related to the adherence to the social criteria and maintaining records about any necessary corrective measures arising from them

          Referenzdokumente:

          page 27/40

        • Enthält der Standard Anforderungen zur Information der Arbeitnehmer*innen über ihre Arbeitsrechte?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          3.11 • informing workers of minimum social criteria and any other related information provided by IVN in the applicable local language(s)

          Referenzdokumente:

          page 27/40

      • Kinderarbeit
        3/3
        • Fordert der Standard die Verifizierung und die Dokumentierung des Alters von (jungen) Arbeitnehmern?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          3.11. Social Compliance Management Operators must have a policy for social accountability to ensure that the social criteria can be met. They must support the implementation and monitoring of the social criteria by: (...) • maintaining records of the name, age, working hours and the wages paid for each worker

          Referenzdokumente:

          page 27/40

        • Fordert der Standard die Unterstützung von ehemaligen Kinderarbeitern?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          3. 4. Child labour is prohibited (...) Companies must develop or participate in and contribute to policies and programmes which provide for the tran-sition of any child found to be performing child labour to enable her or him to attend and remain in quality edu-cation until no longer a child.

          Referenzdokumente:

          page 24/40

        • Beinhaltet der Standard Kriterien für den besonderen Umgang mit jungen Arbeitnehmern?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          Children and young persons under 18 must not be employed at night or in hazardous conditions. As long as children and adolescents still are not full-growing, they must not be exposed to exhausting activities. They must not work more than 8 hours per day or a maximum of 40 hours per week. After more than 4.5 up to 6 working hours, a break of at least 30 minutes is to be granted. After 6 working hours or more, the break should be prolonged to at least 60 minutes.

          Referenzdokumente:

          page 25/40

      • Löhne und Zuschüsse
        5/8
        • Fordert der Standard die Zahlung von Löhnen, die für die grundlegenden Bedürfnisse des Arbeitnehmers und dessen Familie ausreichen (existenzsichernde Löhne)?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          3.7. Fair remuneration Wages and benefits paid for a standard working week meet, at a minimum, national legal standards or industry benchmark standards, whichever is higher. In any event wages should always be enough to meet basic needs and to provide some discretionary income.

          Referenzdokumente:

          page 26

        • Fordert der Standard die Zahlung von gesetzlichen Mindestlöhnen und Sozialleistungen?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          3.7. Fair remuneration Wages and benefits paid for a standard working week meet, at a minimum, national legal standards or industry benchmark standards, whichever is higher. In any event wages should always be enough to meet basic needs and to provide some discretionary income.

          Referenzdokumente:

          https://naturtextil.de/wp-content/uploads/2020/08/Richtlinie_IVN_Best_6_1_English_2018_08_01.pdf

        • Verlangt der Standard die Gewährung von Sozialleistungen?
          Antwort: Nein
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten
        • Fordert der Standard die Vergütung von Überstunden?
          Antwort: Advanced: Ja, und Überstunden werden mit einem Satz von mindestens 125 % des regulären Einkommens vergütet
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 2/2
          Mögliche Antworten
          • Basic: Ja (1 Punkt)
          • Advanced: Ja, und Überstunden werden mit einem Satz von mindestens 125 % des regulären Einkommens vergütet (2 Punkte)

          Auszug aus dem Standard:

          3.8. Working hours are not excessive (....) Overtime must be voluntary, may not exceed 12 hours per week, may not be demanded on a regular basis, may not involve a significantly higher likelihood of occupational hazards and must always be com-pensated either at a premium rate of not less than one and one-quarter times the regular rate or with time off.

          Referenzdokumente:

          page 26/40

        • Fordert der Standard bezahlten Urlaub?
          Antwort: Keine Informationen vorhanden
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten
          • Basic (0 Punkte)
          • Advanced: Zwei der drei folgenden Elemente: Gelegenheitsurlaub, Krankheit oder Jahresurlaub (1 Punkt)

          Auszug aus dem Standard:

          3.8. Working hours are not excessive (...) Special leave days shall be added to national regulations and industrial tariffs.

          Referenzdokumente:

          page 26 reference to special leave, but not to normal paid leave (eg maternity, annual )

        • Beinhaltet der Standard Kriterien für die pünktliche und rechtzeitige Zahlung von Löhnen in einer geeigneten Form?
          Antwort: Basic: Ja, einige Maßnahmen sind vorhanden
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/2
          Mögliche Antworten
          • Basic: Ja, einige Maßnahmen sind vorhanden (1 Punkt)
          • Advanced: Ja, alle Maßnahmen sind vorhanden (2 Punkte)

          Auszug aus dem Standard:

          3.7. Fair remuneration Wages and benefits paid for a standard working week meet, at a minimum, national legal standards or industry benchmark standards, whichever is higher. In any event wages should always be enough to meet basic needs and to provide some discretionary income. Before they enter employment, all workers must be provided with a labour contract, which at least includes the place of work, working hours and the wage per particular working period (per hour, week or month) and vacation entitlement. Employment requirements must comply with national laws and include information regarding wages as well as the respective social benefits. The specifics of their wages for each pay period must be communicated to the workers at each wage payment. Deductions from wages as a disciplinary measure are not permitted. Other deductions are permitted only under the conditions and to the extent prescribed by law or fixed by collective agreement.

          Referenzdokumente:

          page 26

      • Gleichstellung der Geschlechter
        1/3
        • Beinhaltet der Standard Kriterien über Verhaltensanweisungen und Prozesse, die die Diskriminierung auf Grund des Geschlechts am Arbeitsplatz verhindern?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          There is to be no form of discrimination e.g. in hiring, compensation, access to training, promotion, termination or retirement based on race, caste, ethnic or national origin, nationality, religion, age, disability, gender, marital status, sexual orientation, union membership, political affiliation, or social background.

          Referenzdokumente:

          3.5. No discriminatory practices

        • Beinhaltet der Standard Kriterien für das Recht auf Mutterschaftsschutz (gemäß Definition in ILO 183)?
          Antwort: Keine Informationen vorhanden
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/2
          Mögliche Antworten
          • Basic: teilweise erfüllt (1 Punkt)
          • Advanced: vollständig erfüllt (2 Punkte)
      • Freiwillige Arbeit
        2/3
        • Setzt der Standard voraus, dass die Arbeitnehmende nicht in Schuldknechtschaft gehalten oder gezwungen werden, für einen Arbeitgeber zu arbeiten, um Schulden zu begleichen?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          3.2. Employment is freely chosen There is no servitude, forced, bonded or indentured labour.

          Referenzdokumente:

          page 24/40

        • Verbietet der Standard die Einbehaltung von Dokumenten der Arbeitnehmenden?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          3.2. Employment is freely chosen (...) Workers are not required to lodge "deposits" or their identity papers with their employer and are free to leave their employer after reasonable notice.

          Referenzdokumente:

          page 24/40

        • Beinhaltet der Standard Kriterien zur Bewegungsfreiheit der Arbeitnehmer?
          Antwort: Nein
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten
      • Nichtdiskriminierung
        1/1
        • Beinhaltet der Standard Kriterien zur Nichtdiskriminierung von Menschen mit Behinderungen?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          There is to be no form of discrimination e.g. in hiring, compensation, access to training, promotion, termination or retirement based on race, caste, ethnic or national origin, nationality, religion, age, disability, gender, marital status, sexual orientation, union membership, political affiliation, or social background.

          Referenzdokumente:

          3.5. No discriminatory practices

      • Arbeitszeiten
        1/2
        • Enthält der Standard Kriterien für Arbeitszeiten, Ruhetage oder Überstunden?
          Antwort: Basic: Verpflichtung zur Aufnahme von Kriterien für Arbeitszeiten, Ruhetage oder Überstunden/freiwillige Mehrarbeit, die zumindest den nationalen Rechtsvorschriften oder branchenspezifischen Mindeststandards entsprechen
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/2
          Mögliche Antworten
          • Basic: Verpflichtung zur Aufnahme von Kriterien für Arbeitszeiten, Ruhetage oder Überstunden/freiwillige Mehrarbeit, die zumindest den nationalen Rechtsvorschriften oder branchenspezifischen Mindeststandards entsprechen (1 Punkt)
          • Advanced: Die Standardanforderungen entsprechen den Anforderungen von ILO 1 (2 Punkte)

          Auszug aus dem Standard:

          3.8. Working hours are not excessive Working hours must comply with national laws and benchmark industry standards, whichever affords greater protection. In any event, workers must not be required to work in excess of 48 hours per week on a regular basis, must have the right to have rest breaks every working day and must be provided with on average at least one day off for every 7-day period. Overtime must be voluntary, may not exceed 12 hours per week, may not be demanded on a regular basis, may not involve a significantly higher likelihood of occupational hazards and must always be com-pensated either at a premium rate of not less than one and one-quarter times the regular rate or with time off.

          Referenzdokumente:

          page 26/40

      • Geltungsbereich der Arbeitnehmerrechte
        2/6
        • Gelten die in dem Standard festgelegten Arbeitnehmerrechte und -leistungen für alle Arten von Arbeit?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          Obligations to employees under labour or social security laws and regulations arising from the regular employ-ment relationship must not be avoided through the use of labour-only contracting, sub- contracting, or home-working arrangements, or through apprenticeship schemes where there is no real intent to impart skills or provide regular employment, nor must any such obligations be avoided through the excessive use of fixed-term con-tracts of employment.

          Referenzdokumente:

          3.9 Non precarious employment

        • Gelten die Arbeitnehmerrechte und -leistungen des Standards auch für Arbeitnehmer von Subunternehmen oder im Unterauftrag?
          Antwort: Nein
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten

          Auszug aus dem Standard:

        • Enthält der Standard Kriterien für die Erstellung von Arbeitsverträgen, die den nationalen gesetzlichen Anforderungen entsprechen?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          3.7. Fair remuneration (...) Before they enter employment, all workers must be provided with a labour contract, which at least includes the place of work, working hours and the wage per particular working period (per hour, week or month) and vacation entitlement. Employment requirements must comply with national laws and include information regarding wages as well as the respective social benefits.

          Referenzdokumente:

          page 26

        • Enthält der Standard Kriterien für Verträge, die in einer für den Arbeitnehmenden verständlichen Sprache verfasst werden?
          Antwort: Nein
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten
        • Verlangt der Standard die Einhaltung aller ILO-Kernarbeitsnormen für die verschiedenen Lieferanten entlang der Lieferkette?
          Antwort: Keine Informationen vorhanden
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 0/2
          Mögliche Antworten
          • Basic: Wichtigste Tier-1-Lieferanten (1 Punkt)
          • Advanced: Alle Tier-1-Lieferanten (2 Punkte)

          Auszug aus dem Standard:

          Minimum social criteria 3.1. Scope The following social criteria apply to all textile processing and manufacturing stages which employ workers. As soon as applicable minimum social criteria will be introduced to recognized organic farming standards, these will apply to the farm level as well. The entity under whose name or brand the labelled BEST Goods are sold to the end consumer is responsible for exercising due care in ensuring compliance of the products with this standard, the Licensing and Labelling Guide and further provisions as released by IVN.

          Referenzdokumente:

          page 24, 28/40

    • Gesundheit und Sicherheit
      11/17
      • Gesundheit der Beschäftigten
        8/14
        • Verbietet der Standard die Belästigung oder Misshandlung von Arbeitnehmenden?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          3.10. Harsh or inhumane treatment is prohibited Physical abuse or discipline, the threat of physical abuse, sexual or other harassment and verbal abuse or other forms of intimidation must be prohibited. All disciplinary measures must be documented. 3.11. Social Compliance Management Operators must have a policy for social accountability to ensure that the social criteria can be met. They must support the implementation and monitoring of the social criteria by: (...) • refraining from disciplinary measures, dismissals or other forms of discrimination against workers for provid-ing information concerning observance of the social criteria

          Referenzdokumente:

          page 27/40

        • Beinhaltet der Standard Kriterien zu Gesundheit und Sicherheit am Arbeitsplatz gemäß ILO 155?
          Antwort: Advanced: Vollständig erfüllt nach ILO 155
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 2/2
          Mögliche Antworten
          • Basic: Teilweile erfüllt nach ILO 155 (1 Punkt)
          • Advanced: Vollständig erfüllt nach ILO 155 (2 Punkte)

          Auszug aus dem Standard:

          3.6. Working conditions are safe and hygienic A safe and hygienic working environment must be provided, bearing in mind the prevailing knowledge of the in-dustry and of any specific hazards. Especially vulnerable persons such as young workers, new and expecting mothers and persons with disabilities shall receive special protection. Appropriate personal protective equipment must be provided to the workers and it must be assured that these are being used whenever necessary. Ade-quate steps must be taken to prevent accidents and injury to health arising from, associated with, or occurring in the course of work, by minimizing, so far as is reasonably practicable, the causes of hazards inherent in the work-ing environment. Procedures must be in place to detect, assess, avoid and respond to potential threats to the health and safety of workers. Effective measures must be taken to prevent workers from having accidents, injuries or illnesses, arising from, associated with, or occurring during work. For each 10 employees in the company, one person is to be designated to provide first aid in case of accidents or emergencies. A facility for reclining in the case of medical emergencies must be available. Persons providing first aid must be trained and retrained every 2nd year. A documentation of vocational training is to be provided. Escape and rescue plans are to be visibly posted for all workers. Further, the installation of fire extinguishers and the identification of escape routes and emergency assembly places are mandatory. For all chemical substances and preparations used the corresponding Material Safety Data Sheet (MSDS) must be maintained and it must be assured that the applicable health and safety measures for handling and storing these chemicals are implemented. Companies must take all appropriate measures within their sphere of influence, to ensure the stability and safety of the equipment and buildings they use, including worker accommodation where provided, as well as to protect against any foreseeable emergency. Workers must be able to exit the premises in case of imminent danger with-out seeking permission. Workers must receive regular and recorded health and safety training, incl. fire prevention training and evacua-tion drills. Such training must be repeated for new or reassigned workers. Rest rooms and rest areas must be made available separately from engine rooms/working area. Employees must be offered a facility to recline. Access to clean toilet facilities and to potable water, and, if appropriate, to rest areas, food consuming areas and sanitary facilities for food storage must be provided. Accommodation, where provided, must be clean, safe, and meet the basic needs of the workers. As part of code compliance, the company must designate a senior management representative responsible for health and safety.

          Referenzdokumente:

          page 25/40

        • Beinhaltet der Standard Anforderungen hinsichtlich der Bedingungen am Arbeitsplatz?
          Antwort: Keine Informationen vorhanden
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/2
          Mögliche Antworten
          • Basic: At least four requirements on proper workplace environment (1 Punkt)
          • Advanced: Alle Anforderungen an eine angemessene Arbeitsplatzumgebung (2 Punkte)

          Referenzdokumente:

          page 25 no requirements on lighting, noise, temperature etc

        • Fordert der Standard Richtlinien und Abläufe, mit denen die Gesundheit und Sicherheit am Arbeitsplatz sichergestellt wird?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          3.6. Working conditions are safe and hygienic A safe and hygienic working environment must be provided, bearing in mind the prevailing knowledge of the in-dustry and of any specific hazards. Especially vulnerable persons such as young workers, new and expecting mothers and persons with disabilities shall receive special protection. Appropriate personal protective equipment must be provided to the workers and it must be assured that these are being used whenever necessary. Ade-quate steps must be taken to prevent accidents and injury to health arising from, associated with, or occurring in the course of work, by minimizing, so far as is reasonably practicable, the causes of hazards inherent in the work-ing environment.

          Referenzdokumente:

          page 25, 27/40

        • Enthält der Standard Kriterien für den Zugang zur medizinischen Grundversorgung der Arbeitnehmenden?
          Antwort: Basic: Nur Behandlung von akuten arbeitsbedingten Unfällen / Erkrankungen
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/2
          Mögliche Antworten
          • Basic: Nur Behandlung von akuten arbeitsbedingten Unfällen / Erkrankungen (1 Punkt)
          • Advanced: Arbeitsunfälle plus Präventionsmaßnahmen (2 Punkte)

          Auszug aus dem Standard:

          For each 10 employees in the company, one person is to be designated to provide first aid in case of accidents or emergencies. A facility for reclining in the case of medical emergencies must be available. Persons providing first aid must be trained and retrained every 2nd year. A documentation of vocational training is to be provided.

          Referenzdokumente:

          page 25/40

        • Sieht der Standard Entschädigungszahlungen/Kostenübernahme bei Arbeitsunfällen und Verletzungen vor?
          Antwort: Keine Informationen vorhanden
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/2
          Mögliche Antworten
          • Basic: teilweise Kostendeckung (1 Punkt)
          • Advanced: volle Kostendeckung (2 Punkte)
        • Fordert der Standard den Zugang der Arbeitnehmer zu sauberem Trinkwasser?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          Access to clean toilet facilities and to potable water, and, if appropriate, to rest areas, food consuming areas and sanitary facilities for food storage must be provided.

          Referenzdokumente:

          page 25

        • Fordert der Standard den Zugang zu sauberen und verbesserten Sanitäreinrichtungen?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          Access to clean toilet facilities and to potable water, and, if appropriate, to rest areas, food consuming areas and sanitary facilities for food storage must be provided.

          Referenzdokumente:

          page 25

        • Um dieses Kriterium zu erfüllen, muss der Standard eine systematische Schulung der Arbeitnehmer*innen in Fragen der Gesundheit und Sicherheit vorschreiben.
          Antwort: Keine Informationen vorhanden
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 0/1
          Mögliche Antworten
          • Basic (0 Punkte)
          • Advanced: Systematisches Training (1 Punkt)

          Auszug aus dem Standard:

          3.6 Workers must receive regular and recorded health and safety training, incl. fire prevention training and evacua-tion drills. Such training must be repeated for new or reassigned workers.

          Referenzdokumente:

          page 25/40

        • Verlangt der Standard sichere und angemessene Unterkünfte für alle Arbeitnehmer*innen?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          Rest rooms and rest areas must be made available separately from engine rooms/working area. Employees must be offered a facility to recline. Access to clean toilet facilities and to potable water, and, if appropriate, to rest areas, food consuming areas and sanitary facilities for food storage must be provided. Accommodation, where provided, must be clean, safe, and meet the basic needs of the workers.

          Referenzdokumente:

          page 25

      • Gebäude- und Brandsicherheit
        3/3
        • Beinhaltet der Standard Kriterien zur Gebäudesicherheit?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          Companies must take all appropriate measures within their sphere of influence, to ensure the stability and safety of the equipment and buildings they use, including worker accommodation where provided, as well as to protect against any foreseeable emergency. Workers must be able to exit the premises in case of imminent danger with-out seeking permission.

          Referenzdokumente:

          page 25/40

        • Beinhaltet der Standard Kriterien für den Brandschutz?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          Escape and rescue plans are to be visibly posted for all workers. Further, the installation of fire extinguishers and the identification of escape routes and emergency assembly places are mandatory. (...) Workers must receive regular and recorded health and safety training, incl. fire prevention training and evacua-tion drills. Such training must be repeated for new or reassigned workers.

          Referenzdokumente:

          page 25/40

        • Enthält der Standard Kriterien zur Evakuierungssicherheit und zum Notfallmanagementplan?
          Antwort: Basic: Es bestehen Sicherheitsanforderungen für Notfälle und Evakuierungen
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten
          • Basic: Es bestehen Sicherheitsanforderungen für Notfälle und Evakuierungen (1 Punkt)
          • Advanced: An emergency management plan exists (1 Punkt)

          Auszug aus dem Standard:

          3.6. Working conditions are safe and hygienic (...) Escape and rescue plans are to be visibly posted for all workers. Further, the installation of fire extinguishers and the identification of escape routes and emergency assembly places are mandatory. (...) Companies must take all appropriate measures within their sphere of influence, to ensure the stability and safety of the equipment and buildings they use, including worker accommodation where provided, as well as to protect against any foreseeable emergency. Workers must be able to exit the premises in case of imminent danger with-out seeking permission. Workers must receive regular and recorded health and safety training, incl. fire prevention training and evacua-tion drills. Such training must be repeated for new or reassigned workers.

          Referenzdokumente:

          page 25/40

  • Ethisches Wirtschaften
    3/13
    • Wirtschaftliche Entwicklung und faire Geschäftspraktiken
      2/10
      • Wirtschaftliche Nachhaltigkeit
        0/4
        • Beinhaltet der Standard Kriterien für Aus- und Weiterbildungsangebote für Arbeitnehmer?
          Antwort: Nein
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten
        • Beinhaltet der Standard Kriterien für die wirtschaftliche Leistungsfähigkeit des Unternehmens?
          Antwort: Nein
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten
        • Beinhaltet der Standard Kriterien für Managementpläne zur kontinuierlichen Verbesserung?
          Antwort: Nein
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten
        • Beinhaltet der Standard Kriterien zur Verbesserung der Produktivität?
          Antwort: Nein
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten
      • Legalität
        0/2
        • Beinhaltet der Standard Kriterien für die Rechtmäßigkeit des Unternehmens?
          Antwort: Nein
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten

          Auszug aus dem Standard:

          Companies must keep accurate information regarding their activities, structure and performance, and disclose these in accordance with applicable regulations and industry benchmark practices. Companies must neither participate in falsifying such information, nor in any act of misrepresentation in the sup-ply chain.

          Referenzdokumente:

          page 27

        • Beinhaltet der Standard allgemeine Kriterien für die Einhaltung relevanter lokaler, regionaler und nationaler Gesetze und Bestimmungen?
          Antwort: Nein
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten
      • Verantwortungsbewusste Beschaffungspraktiken
        2/4
        • Beinhaltet der Standard Kriterien zur fairen Preisen oder Preisprämien?
          Antwort: Nein
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten
          • Nein (0 Punkte)
          • Ja (1 Punkt)
          • Nicht anwendbar (0 Punkte)
        • Gelten die Ansprüche und Leistungen des Standards auch für Lieferanten der Produktionsmittel?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          2.4.13. Record keeping & internal quality assurance All operational procedures and practices must be documented by effective control systems and records that en-able tracing and verification of: • the origin, nature and quantities of organic and other (raw) materials, accessories as well as inputs which have been delivered to the unit • the flow of goods within the unit (processing/manufacturing steps performed, recipes used and stock quantities) • the composition of manufactured products • the nature, quantities and consignees of BEST Goods which have left the unit • any other information that may be required for the purposes of proper inspection of the operation re-cords relevant to the inspection. Certified Entities purchasing organic fibres must receive and maintain transaction certificates (=TCs, certificates of inspection) issued by a recognised certifier and certified in accordance with the criteria of chapter 2.1 for the entire quantity purchased. For sheep's wool from risk areas, proof must be supplied that the wool derives from mulesing-free sheep hus-bandry. Certified Entities purchasing BEST Goods must receive and maintain BEST transaction certificates, issued by an Approved Certifier for the whole quantity of BEST Goods purchased. Shipments of BEST goods purchased by certified retailers and labelled with the licence number of the manufacturer/supplier are exempt from this requirement. In accordance with the corresponding IVN policy, issuing TCs that cover multiple shipments is possible under certain conditions. The maximum time period that a single TC can cover is 3 months. The consignee of any organic fibres and BEST Goods must check the integrity of the packaging or container and verify the origin and nature of the certified products from the information contained in the product marking and corresponding documentation (e.g. invoice, bill of lading, transaction certificate) upon receipt of the certified products. A product whose IVN BEST compliant status is in doubt may only be put into processing or packaging after resolv-ing that doubt. Organic fibres and IVN BEST Goods must clearly be identified as such on all corresponding invoices. Certified Entities must have invoices, delivery notes as well as copies of valid Letters of Approval at hand listing all procedures used in processing and manufacturing IVN BEST Goods as verification/proof that all colourants and textile auxiliaries used for IVN BEST Goods are actually currently approved. The Certified Entity must have concluded a contract with each subcontractor stipulating the conditions of the relevant job work as-signed and remains finally responsible for compliance with all criteria of this standard. Quality assurance system 4.1. Auditing of processing, manufacturing and trading stages Processors, manufacturers and traders of IVN BEST Goods must participate in the BEST certification procedure which is based on an annual on-site inspection cycle (including possible additional unannounced inspections based on a risk assessment of the operations). They must hold a valid certificate of compliance listing the certified 28 products/product categories and the processing, manufacturing and trading activities that are qualified under the scope of certification (including names of subcontractors assigned and their relevant processing and manufactur-ing steps). The responsible certifier may decide to perform remote-inspections instead of on-site inspections for traders which do not have or subcontract any processing or manufacturing activities. On-site inspection must however be performed at least for the first year and every 3rd year of granted certification. Traders having an annual turnover with BEST Goods less than 5000 € and retailers only selling to consumers are exempt from the certification obliga-tion; provide they do not (re-)pack or (re-)label BEST Goods. Traders with less than 5000€ annual turnover must register with an Approved Certifier and must inform the same immediately after their annual turnover exceeds 5000€. The responsible Approved Certifier may further decide on exceptions from the annual inspection cycle for small-scale subcontractors with a low risk potential regarding environmental and social criteria. These subcontractors must be clearly identified and are obliged to have a written contract with the certified en-tity (who is responsible of the conformity with the BEST standard) and can undergo an onsite-inspection if de-manded by the authorized certifier. On-site inspection must however be performed to such units at least for the first year and every 3rd year of granted certification. The entity under whose name or brand the labelled BEST Goods are sold to the end consumer is responsible for exercising due care in ensuring compliance of the products with this standard, the Licensing and Labelling Guide and further provisions as released by IVN. Certifiers must be authorized by IVN for the specific scope(s) in which they offer certification services: 1. Certification of mechanical textile processing and manufacturing operations and their products 2. Certification of wet processing and finishing operations and their products 3. Certification of trading operations and related products Basis for authorisation by the IVN is an accreditation of the certifier in accordance with the IVN document ‘Ap-proval Procedure and Requirements for Certification Bodies’ plus contract by the main co-operation partner of IVN for this process, IOAS, or another recognised accreditation body.

          Referenzdokumente:

          page 16, 28/40

        • Beinhaltet der Standard Kriterien zur Reduzierung des Zeitdrucks für Lieferanten?
          Antwort: Nein
          Verbindlichkeitsgrad: Nicht erfu00fcllt
          Punktzahl: 0/1
          Mögliche Antworten
        • Enthält der Standard Anforderungen für die Produktionsprozesse, die über die Primärproduktion hinausgehen?
          Antwort: Ja
          Verbindlichkeitsgrad: Sofort verbindlich
          Punktzahl: 1/1
          Mögliche Antworten

          Auszug aus dem Standard:

          2.4.13. Record keeping & internal quality assurance All operational procedures and practices must be documented by effective control systems and records that en-able tracing and verification of: • the origin, nature and quantities of organic and other (raw) materials, accessories as well as inputs which have been delivered to the unit • the flow of goods within the unit (processing/manufacturing steps performed, recipes used and stock quantities) • the composition of manufactured products • the nature, quantities and consignees of BEST Goods which have left the unit • any other information that may be required for the purposes of proper inspection of the operation re-cords relevant to the inspection. Certified Entities purchasing organic fibres must receive and maintain transaction certificates (=TCs, certificates of inspection) issued by a recognised certifier and certified in accordance with the criteria of chapter 2.1 for the entire quantity purchased. For sheep's wool from risk areas, proof must be supplied that the wool derives from mulesing-free sheep hus-bandry. Certified Entities purchasing BEST Goods must receive and maintain BEST transaction certificates, issued by an Approved Certifier for the whole quantity of BEST Goods purchased. Shipments of BEST goods purchased by certified retailers and labelled with the licence number of the manufacturer/supplier are exempt from this requirement. In accordance with the corresponding IVN policy, issuing TCs that cover multiple shipments is possible under certain conditions. The maximum time period that a single TC can cover is 3 months. The consignee of any organic fibres and BEST Goods must check the integrity of the packaging or container and verify the origin and nature of the certified products from the information contained in the product marking and corresponding documentation (e.g. invoice, bill of lading, transaction certificate) upon receipt of the certified products. A product whose IVN BEST compliant status is in doubt may only be put into processing or packaging after resolv-ing that doubt. Organic fibres and IVN BEST Goods must clearly be identified as such on all corresponding invoices. Certified Entities must have invoices, delivery notes as well as copies of valid Letters of Approval at hand listing all procedures used in processing and manufacturing IVN BEST Goods as verification/proof that all colourants and textile auxiliaries used for IVN BEST Goods are actually currently approved. The Certified Entity must have concluded a contract with each subcontractor stipulating the conditions of the relevant job work as-signed and remains finally responsible for compliance with all criteria of this standard. Quality assurance system 4.1. Auditing of processing, manufacturing and trading stages Processors, manufacturers and traders of IVN BEST Goods must participate in the BEST certification procedure which is based on an annual on-site inspection cycle (including possible additional unannounced inspections based on a risk assessment of the operations). They must hold a valid certificate of compliance listing the certified 28 products/product categories and the processing, manufacturing and trading activities that are qualified under the scope of certification (including names of subcontractors assigned and their relevant processing and manufactur-ing steps). The responsible certifier may decide to perform remote-inspections instead of on-site inspections for traders which do not have or subcontract any processing or manufacturing activities. On-site inspection must however be performed at least for the first year and every 3rd year of granted certification. Traders having an annual turnover with BEST Goods less than 5000 € and retailers only selling to consumers are exempt from the certification obliga-tion; provide they do not (re-)pack or (re-)label BEST Goods. Traders with less than 5000€ annual turnover must register with an Approved Certifier and must inform the same immediately after their annual turnover exceeds 5000€. The responsible Approved Certifier may further decide on exceptions from the annual inspection cycle for small-scale subcontractors with a low risk potential regarding environmental and social criteria. These subcontractors must be clearly identified and are obliged to have a written contract with the certified en-tity (who is responsible of the conformity with the BEST standard) and can undergo an onsite-inspection if de-manded by the authorized certifier. On-site inspection must however be performed to such units at least for the first year and every 3rd year of granted certification. The entity under whose name or brand the labelled BEST Goods are sold to the end consumer is responsible for exercising due care in ensuring compliance of the products with this standard, the Licensing and Labelling Guide and further provisions as released by IVN. Certifiers must be authorized by IVN for the specific scope(s) in which they offer certification services: 1. Certification of mechanical textile processing and manufacturing operations and their products 2. Certification of wet processing and finishing operations and their products 3. Certification of trading operations and related products Basis for authorisation by the IVN is an accreditation of the certifier in accordance with the IVN document ‘Ap-proval Procedure and Requirements for Certification Bodies’ plus contract by the main co-operation partner of IVN for this process, IOAS, or another recognised accreditation body.

          Referenzdokumente:

          page 16,28/40

    • Korruption und Bestechung
      1/3
      • Beinhaltet der Standard Kriterien zur Prävention von Korruption und Bestechung?
        Antwort: Basic: Korruption und Bestechung sind verboten
        Verbindlichkeitsgrad: Sofort verbindlich
        Punktzahl: 1/1
        Mögliche Antworten
        • Basic: Korruption und Bestechung sind verboten (1 Punkt)
        • Advanced (0 Punkte)

        Auszug aus dem Standard:

        3.12. Ethical Business Behaviour Companies may not be involved in any acts of corruption, extortion or embezzlement, nor in any form of bribery - including but not limited to - promising, offering, giving or accepting any improper monetary or other incentive.

        Referenzdokumente:

        page 27/40

      • Beinhaltet der Standard Kriterien für die Durchführung einer sorgfältigen Bewertung der Geschäftspartner, einschl. Tochtergesellschaften und Auftragnehmer?
        Antwort: Nein
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten
      • Beinhaltet der Standard Kriterien für die Schulung von Arbeitnehmern in Führungspositionen zu den Themen Korruption und Bestechung?
        Antwort: Nein
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten
  • Soziale & kulturelle Rechte und gesellschaftliche Verantwortung
    0/7
    • Entwicklung der lokalen Wirtschaft
      0/4
      • Beinhaltet der Standard Kriterien für den bevorzugten Einkauf lokaler Materialien, Waren, Produkte und Dienstleistungen?
        Antwort: Nein
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten
      • Beinhaltet der Standard Kriterien für die bevorzugte Anstellung lokaler Arbeitskräfte?
        Antwort: Nein
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten
      • Beinhaltet der Standard Kriterien für Investitionen in die Entwicklung der Gemeinde, die über die Geschäftstätigkeit hinausgehen?
        Antwort: Nein
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten
      • Beinhaltet der Standard Kriterien, dass negative Auswirkungen auf den Zugang und die Verfügbarkeit von Ressourcen für anliegende Gemeinden und kleinbäuerliche Betriebe zu verhindern sind (insbes. Wasser und Land)?
        Antwort: Nein
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten
    • Rechte der Gemeinde
      0/3
      • Enthält der Standard Anforderungen für Streitbeilegungsmechanismen für betroffene Gemeinden?
        Antwort: Keine Informationen vorhanden
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/2
        Mögliche Antworten
        • Basic: Der Standard muss einen Beschwerdemechanismus für betroffene Gemeinden vorsehen. (1 Punkt)
        • Advanced: Der Standard sieht einen fairen Ausgleich für die negativen Auswirkungen der Geschäftstätigkeit auf lokale Gemeinden und Einzelpersonen vor. (2 Punkte)
      • Enthält der Standard Anforderungen zum Schutz lokaler historischer, archäologischer, kultureller und spiritueller Güter und Stätten?
        Antwort: Keine Informationen vorhanden
        Verbindlichkeitsgrad: Nicht erfu00fcllt
        Punktzahl: 0/1
        Mögliche Antworten
        • Basic (0 Punkte)
        • Advanced: Schützen und den Zugang nicht behindern (1 Punkt)

Welche Phasen des Produktlebensweges werden vom Siegel abgedeckt?

Rohstoffproduktion

Anbau von Naturfasern (z.B. Baumwolle) und Herstellung von Kunstfasern (z.B. Polyester)

Herstellung

Die Produktion und Weiterverarbeitung von Garnen und Stoffen zu einem fertigen Kleidungsstück umfasst viele Teilschritte (z.B. Spinnen, Weben und Stricken, Nähen, Konfektionierung und Veredelung)

Transport / Handel

Der Transportweg von einem Produktionsschritt zum nächsten sowie zum Endverbraucher

Nutzungsphase

Die Phase des Gebrauchs durch den Besitzer

End-of-life

Angemessene Entsorgung der Textilien oder Rückführung der Stoffe in den Kreislauf (Recycling)